Set up WDR3600 with two networks of different sizes

Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware
View previous topic :: View next topic  
Author Message
stombo
DD-WRT Novice


Joined: 21 Jul 2014
Posts: 1
PostPosted: Mon Jul 21, 2014 7:37    Post subject: Set up WDR3600 with two networks of different sizes Reply with quote
I have a TP-Link WDR3600 installed with V24 SP2 and I am trying to set up two wireless networks of different sizes, for a cafe with a back office.

The office wlan is at 192.168.1.*/255.255.255.0 and has relatively few dhcp clients

and a public wlan on 192.168.5.*/255.255.0.0 which has a lot of dhcp clients

I set up the office on ath0 and ath1 on br0 and the public wlan on ath0.1 and ath1.1, on br1

I set up a second dhcp server on br1

My problem is that the public wlan runs out of addresses and has to be hard reset. I have shortened the lease times but would rather get it working the way it should with the full range of addresses available.
Back to top View user's profile Send private message
Sponsor
xbox180
DD-WRT Novice


Joined: 09 Apr 2012
Posts: 44
PostPosted: Wed Jul 23, 2014 9:41    Post subject: Reply with quote
Have you also increased the "Max Associated Clients" from default value of 256? Its under Advanced Settings in Wireless Settings.

How many wireless devices do you need to serve at a time anyway?
_________________
RT-N66U Best Dual Band Router IMO
Back to top View user's profile Send private message
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum