JFFS über ein Script aktivieren

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC basierende Hardware
Author Message
Fritz1246
DD-WRT Novice


Joined: 03 Mar 2012
Posts: 14

PostPosted: Wed Apr 23, 2014 22:06    Post subject: JFFS über ein Script aktivieren Reply with quote
Mein Router: WRT54GL Firmware: letzte Version openvpn_jffs_small

Hallo.

Wenn ich diese Kommandos unter Administration-> Commands Sektion mit 'Run Commands' einzeln ausführe, dann wird JFFS aktiviert:

Quote:
nvram set jffs_mounted=1
nvram set enable_jffs2=1
nvram set sys_enable_jffs2=1
nvram set clean_jffs2=1
nvram set sys_clean_jffs2=1
nvram commit
reboot


Wenn ich alle Kommandos auf einmal ausführe, dann passiert nichts. Ich möchte aber wissen, wie ich JFFS als Script (sozusagen mit einer Ausführung) aktivieren kann. Wenn das überhaupt möglich ist.


Last edited by Fritz1246 on Wed Aug 06, 2014 21:31; edited 2 times in total
Sponsor
Fritz1246
DD-WRT Novice


Joined: 03 Mar 2012
Posts: 14

PostPosted: Wed Aug 06, 2014 21:25    Post subject: Reply with quote
Wahrscheinlich kann ich JFFS mit den einzelnen Befehlen aktivieren, weil Pausen dazwischen sind.

Wenn ich z.B. den Befehl "sleep 60" einbaue, dann wird der Befehl ignoriert.

Wie baue ich Pausen dazwischen?
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC basierende Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum