KriLL3 DD-WRT User
Joined: 31 Oct 2007 Posts: 50
|
Posted: Tue Aug 12, 2014 20:32 Post subject: Followed WLAN guide, WAN port doesn't work, reset no joy |
|
E3000 DD-WRT v24-sp2 (03/25/13) mega - build 21061
I followed this guide: http://www.dd-wrt.com/wiki/index.php/Multiple_WLANs to set up a separate no password speed limited wifi that's separated from my normal network for guests to use etc, I finished the GUI method instructions and my WAN port simply stopped working, if I bypass the router and connect to my DSL modem directly it works fine, but the router says "WAN IP: 0 0 0 0" I've toggled WAN port settings in basic setup, Automatic Configuration - DHCP worked earlier with my bridge-mode DSL modem.
Something is clearly horribly wrong, so I figured I might as well reset to factory defaults, doesn't actually change the Setup -> Networking tab any it seems, neither does the reset button, what gives?
I made a new bridge just to test named it "testbridge" and sure enough after factory reset and 30/30/30 it's still there.
I tried to restore the settings as well as I could from memory but it's still not working:
Setup -> Networking:
Setup -> VLANs
Anyone got any ideas how to get my WAN port back?
Any help would be greatly appreciated. |
|