ys11 DD-WRT Novice
Joined: 11 Sep 2014 Posts: 2
|
Posted: Sat Sep 13, 2014 2:57 Post subject: lan ports can not be active after rebooting ,lan not working |
|
I installed DD-WRT v24-sp2 std rev.24461 on ESR-6650.
Once after flashing by u-boot TFTP on lan, lan-ports are active (lan LED flash). Then I change IP DHCP on client-pc,I can connect to 192.168.1.1 router-login.
But after rebooting, LED of lan are not flash and I can not connect ESR-6650 by wired lan.
After that I connect ESR-6650 by wireless.
Another functions are fine,especially I prefer the 3G function.
So,please help how to active the wired lan.
The difference between before and after reboot is times of hotplug-mesages.
Reference log-message
1)Once after flashing
start service
starting Architecture code for rt2880
starting hotplug
Jan 1 00:00:01 udevtrigger[47]: parse_config_file: can't open '/etc/udev/udev.conf' as config file: No such file or directory
function start_hotplug_block not found
function start_hotplug_block not found
function start_hotplug_block not found
function start_hotplug_block not found
function start_hotplug_block not found
done
switch reg write offset=14, value=405555
switch reg write offset=50, value=2001
switch reg write offset=90, value=7f7f
switch reg write offset=98, value=7f3f
switch reg write offset=e4, value=3f
switch reg write offset=40, value=1002
switch reg write offset=44, value=1001
switch reg write offset=48, value=1001
switch reg write offset=70, value=ffff417e
ra0: Network is down
[USB] checking...
2)After reboot
start service
starting Architecture code for rt2880
starting hotplug
Jan 1 00:00:01 udevtrigger[47]: parse_config_file: can't open '/etc/udev/udev.conf' as config file: No such file or directory
function start_hotplug_block not found
function start_hotplug_block not found
function start_hotplug_block not found
function start_hotplug_block not found
function start_hotplug_block not found
function start_hotplug_block not found
done
switch reg write offset=14, value=405555
switch reg write offset=50, value=2001
switch reg write offset=90, value=7f7f
switch reg write offset=98, value=7f3f
switch reg write offset=e4, value=3f
switch reg write offset=40, value=1002
switch reg write offset=44, value=1001
switch reg write offset=48, value=1001
switch reg write offset=70, value=ffff417e
ra0: Network is down
[USB] checking...
Another topics of same ploblems.
http://www.dd-wrt.com/phpBB2/viewtopic.php?p=782426
http://patchwork.openwrt.org/patch/2159/ |
|