Joined: 25 Dec 2010 Posts: 295 Location: Twin Cities, MN
Posted: Sat Sep 13, 2014 22:49 Post subject: Kong build 25015
ddup --flash-latest hasnt worked on last 2 upgrades...says i have latest version.. _________________ NETGEAR R9000 | RT | 40134 NETGEAR R7800 | AP | 40134
ive done this with no problems previous 5 updates...latest 2 upgrades to 25000 & 25015 said i was on latest upgrade when trying to update using ddup..i had to use webif to update..just wondered if ne1 else had issues? _________________ NETGEAR R9000 | RT | 40134 NETGEAR R7800 | AP | 40134
understood but what version of the firmware were you on Nitrus when the ddup told you there was nothing newer to get?
You have mentioned the 2 latest 25000/25015 were out but didn't report as newer but when you ran that; what version were you running?
I cant upgrade mine this weekend as I have planned work that requires my ability to remote network upgrade 2 locations in country. I wont risk impacting my access to random reboots (I am one of the lucky ones who get that when I leave the oldd builds). _________________ Router currently owned:
Netgear R7800 - Router
Netgear R7000 - AP mode
Joined: 25 Dec 2010 Posts: 295 Location: Twin Cities, MN
Posted: Sun Sep 14, 2014 0:17 Post subject:
slidermike wrote:
understood but what version of the firmware were you on Nitrus when the ddup told you there was nothing newer to get?
You have mentioned the 2 latest 25000/25015 were out but didn't report as newer but when you ran that; what version were you running?
I cant upgrade mine this weekend as I have planned work that requires my ability to remote network upgrade 2 locations in country. I wont risk impacting my access to random reboots (I am one of the lucky ones who get that when I leave the oldd builds).
I for one am not that trusting to upgrade over the net so I download the bin, put it in /opt and
ddup --flash-local /opt/newfile.bin
Flashes in 5 or so seconds.
Forgot to mention I also keep a few different revisions in /opt so I can easily switch back and forth among them.
Last edited by ddaniel51 on Sun Sep 14, 2014 1:55; edited 1 time in total
I get your concern but Kong has stated the ddup DOES use/check the md5 hash before upgrading and if it fails the check, it does not flash. _________________ Router currently owned:
Netgear R7800 - Router
Netgear R7000 - AP mode
ddup --flash-latest did not work from 24865 to 25000. I used the remote option that does the md5 check to upgrade to 25000.
ddup --flash-latest is working from 25000 to 25015. _________________ TV LC-40LE924E - Firewall/Router pfSense on A1SRi-2558 - AP R7000 (FW Stock 1.0.4.5) - NMT A-210 (evZap! Skin) - Switch ProCurve 1410-8G - NAS DS213+ (2 x ST3000DM001-1CH166-301 FW: CC24) - Laptop M17xR2
Posted: Sun Sep 14, 2014 12:03 Post subject: Tested on Dlink Dir-868L
Works well, been up for about 6 hrs everything seems to be working nicely,
Nice work Kong.
Hopefully crack the 4 day record I've had with the previous builds, just ran stock for over a week without a reboot to ensure it is indeed firmware related.
Attempted to upgrade from brainslayer build but found I had to install an older kong build before I could successfully upgrade, not sure what was going on with that possibly something to do with Safari.
Posted: Sun Sep 14, 2014 16:29 Post subject: 25015M
The changelog mentions that PPTP/L2TP cliënt connection should be possible:
"-updated kernel to 3.10.54 - supposed to fix issues with L2TP/PPTP client connections"
I've just flashed 25015M and unfortunatly - for me - it is not working, i'm experiencing the same problem as before:
When connecting a cliënt directly to the internet (via the EURODOCIS modem) everything works fine but when trying to connect via the Netgear R7000 running DD-WRT a PPTP connection cannot be established.
I am running into an odd issue with the auto mount in 25015. it does not seem to auto-mount the /opt partition. I can mount it just fine from the commend line and with a script. (real issue is the script starts after the FTP server so it doesn't have access to the correct /opt tree)
I am running into an odd issue with the auto mount in 25015. it does not seem to auto-mount the /opt partition. I can mount it just fine from the commend line and with a script. (real issue is the script starts after the FTP server so it doesn't have access to the correct /opt tree)
I am open to ideas.
attached is a Pic of the mounts in the gui
I am running 25015 also,
I am not having issue's with mounting, did you enter the UUID in the /opt section?
No i have not. I have never had to in the paste. it was only the upgrade to 25015 that started the issue. I am wondering if there is something to the auto-mount and the fact there are two partitions ahead of it that get mounted and it only does the first two? _________________ EA-6900
Asus 68U