WR1043ND V2: ipkg not working

Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware
Author Message
tyr0
DD-WRT Novice


Joined: 14 Sep 2014
Posts: 2

PostPosted: Sun Sep 14, 2014 11:09    Post subject: WR1043ND V2: ipkg not working Reply with quote
Hi,
I´m new to this forum and DD-WRT in general, I hope you will excuse therefore gaps in my knowledge. Recently I installed DD-WRT v24-sp2 (24461) on my TPLINK WR1043ND V2. I´ve enabled JFFS2 and tried to set up p910nd for printer support. In the end I realized that ipkg is not working properly on my box. ipkg does not give any output, no matter if I try ipkg install, status, update etc. I am not able to install any package therefore.

Would be great if you could give me any hints on properly setting up ipkg. Thank you!

Code:

root@Zeus:/# cat /etc/ipkg.conf
src whiterussian http://downloads.openwrt.org/whiterussian/packages
src non-free http://downloads.openwrt.org/whiterussian/packages/non-free
src backports http://downloads.openwrt.org/backports/rc5
dest root /jffs
dest smbfs /tmp/smbshare
dest ram /tmp

Code:

root@Zeus:/jffs# ls -l
drwxr-xr-x    2 root     root             0 Sep 14 14:25 bin
drwxr-xr-x    2 root     root             0 Sep 14 14:25 lib
drwxr-xr-x    3 root     root             0 Sep 14 14:21 tmp
drwxr-xr-x    3 root     root             0 Sep 14 14:23 usr

Code:

root@Zeus:/jffs# df
Filesystem           1K-blocks      Used Available Use% Mounted on
rootfs                    6144      6144         0 100% /
/dev/root                 6144      6144         0 100% /
none                       512         0       512   0% /dev
/dev/mtdblock/3            768       200       568  26% /jffs

Code:

root@Zeus:/# mount
rootfs on / type rootfs (rw)
/dev/root on / type squashfs (ro,relatime)
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
ramfs on /tmp type ramfs (rw,relatime)
none on /dev type tmpfs (rw,relatime,size=512k)
devpts on /dev/pts type devpts (rw,relatime,mode=600)
devpts on /proc/bus/usb type usbfs (rw,relatime)
/dev/mtdblock/3 on /jffs type jffs2 (rw,relatime)

Code:

root@Zeus:~# nvram show | grep jffs
samba3_dirpath=/jffs
size: 25942 bytes (39594 left)
jffs_mounted=1
enable_jffs2=1
sys_enable_jffs2=1
cron_jobs=* * * * * root /jffs/watchprinter
clean_jffs2=0
dhcpd_usejffs=0
sys_clean_jffs2=0


Last edited by tyr0 on Tue Sep 16, 2014 20:03; edited 3 times in total
Sponsor
tyr0
DD-WRT Novice


Joined: 14 Sep 2014
Posts: 2

PostPosted: Mon Sep 15, 2014 13:35    Post subject: Reply with quote
No ideas? I would appreciate any help.
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum