Hello ! I opened my router, solder small pins to connect my homemade USB.
My router is correctly detected when I connect GND + TX + RX, but I get and error 43 in my peripheral handler.
It means that Windows kill my peripheral itself, I supposed inverted TX and RX but I work not even change it..
An idea ? I don't know what is the number of the COM port, to configure PuTTY
Ok actually, it's because I unplugged some TTL connector.. When I unplug the power of my router then I connect wires, it's happen nothing..
When I connect inverting the supposed RX and TX TTL wires, it happend nothing..
I checked my solders all it's ok : the pins and my usb connector.
This is all explained in the serial wiki. You need to read carefully, and get it translated if you need to.
Disconnect your router. Connect the tx and rx together. Type something. It should show up on your screen. If it doesn't your USB is not working properly and needs to be fixed. I strongly suggest you get a proper setup before you fry your router....which you might have already done. IT HAS TO BE A LEVEL SHIFTING ADAPTER! _________________ SIG:
I'm trying to teach you to fish, not give you a fish. If you just want a fish, wait for a fisherman who hands them out. I'm more of a fishing instructor.
LOM: "If you show that you have not bothered to read the forum announcements or to follow the advices in them then the level of help available for you will drop substantially, also known as Murrkf's law.."
