Author
Message
tbdltee DD-WRT Novice Joined: 01 May 2014 Posts: 26
Posted: Sun Sep 14, 2014 3:17 Post subject:
In any case, you still need tftp image file which seem to be difficult for find.
All dd-wrt or from buffalo are not the tftp image file.
The dd-wrt ftfp file I've found is at
ftp://ftp.dd-wrt.com/others/eko/BrainSlayer-V24-preSP2/2010/02-23-10-r13972/WHR-G300N/
try firmware.tftp both with and without rename to firmware.bin _________________ Buffalo WBMR-HP-G300H
DD-WRT v3.0-r29739 std (05/19/16)
Back to top
Sponsor
sflesch DD-WRT Novice Joined: 09 May 2011 Posts: 35
Posted: Mon Sep 15, 2014 13:38 Post subject:
So the file ending in tftp should be a flash file? I assume I can just go with the basic one then upgrade to a newer one later?
Back to top
tbdltee DD-WRT Novice Joined: 01 May 2014 Posts: 26
Posted: Mon Sep 15, 2014 13:57 Post subject:
Yes. I also do the same. I keep the dd-wrt tftp image file to ensure that I can de-brick my router or switch back from open-wrt to dd-wrt.
When I get a working router, I upgrade using web-flash image again. _________________ Buffalo WBMR-HP-G300H
DD-WRT v3.0-r29739 std (05/19/16)
Back to top
sflesch DD-WRT Novice Joined: 09 May 2011 Posts: 35
Posted: Wed Sep 17, 2014 21:49 Post subject:
Just realized that one is not the HP model.
Back to top
sflesch DD-WRT Novice Joined: 09 May 2011 Posts: 35
Posted: Tue Sep 30, 2014 0:44 Post subject:
I still haven't had any luck. Hoping someone else may have. My router has been pretty reliable until these bad firmwares as of late.
Back to top
sflesch DD-WRT Novice Joined: 09 May 2011 Posts: 35
Posted: Tue Sep 30, 2014 14:44 Post subject:
Can anyone point me to a thread which discusses the bad firmware as of late and any possible solutions or updates?
Back to top
boncuk10 DD-WRT Novice Joined: 08 May 2014 Posts: 7
Posted: Mon Oct 06, 2014 6:00 Post subject:
Hi All,
I have the same problem and I want to flash a build from March to my router but the webinterface do not accept the build.
Could someone support us and explain how we can get back to a build from March so that we can use this router again?
Back to top
boncuk10 DD-WRT Novice Joined: 08 May 2014 Posts: 7
Posted: Mon Oct 06, 2014 17:08 Post subject: Firmware flash and brick recovery through TFTP
Hi All,
based on the following HowTo: http://g300nh.blogspot.de/2010/06/firmware-flash-and-brick-recovery.html
I was able to flash the orginal image v1.95. Tomorrow I will flash DD-WRT again
Anyway just some tips from my site:
* check if you use 00:1D:12:34:56:78 or 00-1D-12-34-56-78
* disable the windows firewall
* switch to "router ON"
* I used the windows tftp client with the command: tftp -i 192.168.11.1 PUT c:\firmware _________________ My Router: Buffalo WHR-HP-G300N
Back to top
sflesch DD-WRT Novice Joined: 09 May 2011 Posts: 35
Posted: Tue Oct 21, 2014 18:19 Post subject: Re: Firmware flash and brick recovery through TFTP
Was that the original Buffalo firmware? If not, where did you get it?
Back to top
boncuk10 DD-WRT Novice Joined: 08 May 2014 Posts: 7
Posted: Wed Oct 22, 2014 4:43 Post subject:
Yes I used the original Firmware 1.95 from the bufallo homepage... _________________ My Router: Buffalo WHR-HP-G300N
Back to top
sflesch DD-WRT Novice Joined: 09 May 2011 Posts: 35
Posted: Mon Feb 09, 2015 22:27 Post subject:
So, I've never been able to get the firmware to revert, so I set the router aside. I see now there are a bunch of newer firmwares. Is the 12-22-2014-r25697 firmware safe to use...if I can get it to take via the web flash?
Back to top