[ahmed00medhat]

Hi, i just flashed my access point tl-wa730re with tl-wr703v1-webflash.bin and managed it to work as Access point. But i need some help getting t to work as pptd client.
however, i am out of US and want my smart TV to feel like it is inside US so that i can watch Netflix.

my network:
1- WAG200G ADSL modem connected normally to the internet and with normal network configuration
2- my AP is now connected to one of the 4 ports in the modem with WAN port is disabled and "Assign WAN Port to Switch" is checked.

now i want to configure my AP to PPTP VPNBook.om configuration so that if my TV is connected to it, the traffic goes through the VPN.

i tried many ways to get it work but it doesn't.

1- i tried to configure the WAN port as PPTP
2- i also tried to configure the PPTP service client
3- i tried to run the pptp from SSH but alwasy returns error code ($?) "2"
3- the firmware doesn't support OpenVPN

in trial 1 and 2, i couldn't fill the subnet mask and the subnet as it is not stated on the website.

attached is my current dd-wrt configuration

options.vpn:
#debug stuff
logfd2
debug
dump
#
defaultroute
lock
noauth
nodetach
refuse-eap
#refuse-pap
#refuse-chap
#refuse-mschap
nobsdcomp
nodeflate
#mppe required,stateless #,no40,no56
mppc
lcp-echo-failure 30
lcp-echo-interval 2
persist
usepeerdns
idle 0
ip-up-script /tmp/pptpd_client/ip-up
ip-down-script /tmp/pptpd_client/ip-down
ipparam kelokepptpd
mppe required,no40,no56,stateless
mtu 1436
mru 1436
name vpnbook
password TRuw2swE


SSH:

Connecting to 192.168.1.2:22...
Connection established.
To escape to local shell, press 'Ctrl+Alt+]'.

DD-WRT v24-sp2 std (c) 2012 NewMedia-NET GmbH
Release: 03/15/12 (SVN revision: 18740)
==========================================================

____ ___ __ ______ _____ ____ _ _
| _ \| _ \ \ \ / / _ \_ _| __ _|___ \| || |
|| | || ||____\ \ /\ / /| |_) || | \ \ / / __) | || |_
||_| ||_||_____\ V V / | _ < | | \ V / / __/|__ _|
|___/|___/ \_/\_/ |_| \_\|_| \_/ |_____| |_|

DD-WRT v24-sp2
http://www.dd-wrt.com

==========================================================


BusyBox v1.19.4 (2012-03-15 09:27:12 CET) built-in shell (ash)
Enter 'help' for a list of built-in commands.

root@DD-WRT:~# cd /tmp/pptpd_client/
root@DD-WRT:/tmp/pptpd_client# ps | grep ppt
22125 root 1096 S grep ppt
25398 root 1108 S {vpn} /bin/sh /tmp/pptpd_client/vpn go
root@DD-WRT:/tmp/pptpd_client# /bin/sh /tmp/pptpd_client/vpn stop
Killing VPN PID 25398
Killing PPTP PID
VPN Stopped
root@DD-WRT:/tmp/pptpd_client# /bin/sh /tmp/pptpd_client/vpn start
Launching VPN process
Process launched
root@DD-WRT:/tmp/pptpd_client# Waiting.......
PID file created
Attempting initial connect
Segmentation fault
Initial connection dropped
Attempting connect...
Segmentation fault
Connection dropped...
Attempting connect...
Segmentation fault
Connection dropped...
Attempting connect...
Segmentation fault
Connection dropped...
Attempting connect...
Segmentation fault
Connection dropped...