this build runs really good and reminds me alot of r23919 but new and tweaked.
Did you try if any of the physical WiFi On/Off Toggle button or the SES/WPS button actually work as Radio On/Off switch ? It's supposed to be fixed since 25252.
*Note: Before checking the Radio On/Off functionality of the SES/WPS button, first make sure to Enable it in Services -> Services -> SES/AOSS/EZ-SETUP/WPS Button -> Turning Off Radio: Enable.
this build runs really good and reminds me alot of r23919 but new and tweaked.
Did you try if any of the physical WiFi On/Off Toggle button or the SES/WPS button actually work as Radio On/Off switch ? It's supposed to be fixed since 25252.
*Note: Before checking the Radio On/Off functionality of the SES/WPS button, first make sure to Enable it in Services -> Services -> SES/AOSS/EZ-SETUP/WPS Button -> Turning Off Radio: Enable.
Thanks for pointing that out.
On my WNDR3700v2 it switches off the WiFi okay but leaves the WiFi lights on!!
Status: OK
Reset: NO
Errors:
1) DHCP Client Lease Time on LAN side does not decrease
2) When selecting "Italian" from the languages, the Web Interface is still in English
3) Status -> WAN -> Traffic by Month seems to save values at midnight. If router is switched off before midnight the values are lost.
Status: OK
Reset: NO
Errors:
1) DHCP Client Lease Time on LAN side does not decrease
2) When selecting "Italian" from the languages, the Web Interface is still in English
3) Status -> WAN -> Traffic by Month seems to save values at midnight. If router is switched off before midnight the values are lost.
1) Please explain what on what page you are expecting to decrease
2) Where is language setting. On what page.
3) I always assumed there was nowhere but FLASH to save it on the WNDR3700v2 so it only saved daily to avoid shortening life of flash.
Joined: 24 Feb 2013 Posts: 1634 Location: Belgrade
Posted: Fri Nov 14, 2014 11:08 Post subject:
lollapalooza wrote:
1) Status -> LAN -> DHCP Clients
Client Lease Time (It should be the time left to the expiration of the client) does not decrease.
Only when you use udhcpd as your DHCP server. So, on Setup page uncheck "use DNSMasq as your DHCP" if you want lease time left to the expiration of the client...
Posted: Thu Dec 04, 2014 23:30 Post subject: TL-MR3020
Router Model: TL-MR3020
Status: Ok
Reset: No
Mode: Router
Security: WPA2 Personal-AES / MAC filter /QoS
Wan/lan IP: Static
Functions:
Errors: yes:
1)When enable QoS, the internet is very slowly.
2)Dynamic (20/40 MHz) and Wide HT40 (20+20 MHz) don't work.
3)This router is a single port, should be able to choose between LAN or WAN to keep virtualizations that make the system slower.