Author
Message
DeathReaper DD-WRT Novice Joined: 26 Oct 2014 Posts: 37
Posted: Wed Nov 26, 2014 2:06 Post subject: WIFI Performance
On build 25279 I was able to get roughly 30-80 MBPS on WIFI. I have a 125 MBPS cable internet connection.
With the latest build 25309, I am only getting 10-30 MBPS using the same devices.
What is the best setting for wifi performance?
These is my current settings.
Ath0
Radio is On
Mode AP
Network NG-Mixed
Channel Width: Wide HT40
Extension Channel: Lower
SSID XXX
Channel 11 (2462 MHz)
TX Power 18 dBm
Rate 300 Mb/s
Ath1
Radio is On
Mode AP
Network NA-Mixed
Channel Width: Wide HT40
Extension Channel: Lower
SSID XXX
Channel 153 (5765 MHz)
TX Power 17 dBm
Rate 300 Mb/s
i heard N-Only is still broken so I haven't tried it.
Back to top
Sponsor
woben DD-WRT User Joined: 19 Mar 2008 Posts: 55
Posted: Wed Nov 26, 2014 12:26 Post subject:
better use a old version. I use 23919
Back to top
YaddaMinski DD-WRT User Joined: 24 Oct 2010 Posts: 294
Posted: Wed Nov 26, 2014 22:51 Post subject: Re: WIFI Performance
DeathReaper wrote: On build 25279 I was able to get roughly 30-80 MBPS on WIFI. I have a 125 MBPS cable internet connection.
With the latest build 25309, I am only getting 10-30 MBPS using the same devices.
What is the best setting for wifi performance?
These is my current settings.
Ath0
Radio is On
Mode AP
Network NG-Mixed
Channel Width: Wide HT40
Extension Channel: Lower
SSID XXX
Channel 11 (2462 MHz)
TX Power 18 dBm
Rate 300 Mb/s
Ath1
Radio is On
Mode AP
Network NA-Mixed
Channel Width: Wide HT40
Extension Channel: Lower
SSID XXX
Channel 153 (5765 MHz)
TX Power 17 dBm
Rate 300 Mb/s
i heard N-Only is still broken so I haven't tried it.
Set CW to 'Full 20' and see what you get. Atheros chip is funny with WIDE. What model is your router?
Back to top
tatsuya46 DD-WRT Guru Joined: 03 Jan 2010 Posts: 7568 Location: YWG, Canada
Posted: Thu Nov 27, 2014 1:04 Post subject:
link in sig..
when u want throughput, how is reducing channel width to slow & old ht20 going to increase it? _________________LATEST FIRMWARE(S)
BrainSlayer wrote: we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers
[x86_64] Haswell i3-4150/QCA9984/QCA9882 ------> r55488 std
[QUALCOMM] DIR-862L --------------------------------> r55460 std
▲ ACTIVE / INACTIVE ▼
[QUALCOMM] WNDR4300 v1 --------------------------> r50485 std
[BROADCOM] DIR-860L A1 ----------------------------> r50485 std
Sigh.. why do i exist anyway.. | I love you Anthony.. never forget that.. my other 99% that ill never see again..
Back to top
YaddaMinski DD-WRT User Joined: 24 Oct 2010 Posts: 294
Posted: Thu Nov 27, 2014 2:14 Post subject:
Is the user's router dual band? That is my question. With Full 20 2.4 Ghz should get over 100 mbps no?
Back to top
evilkitty DD-WRT User Joined: 12 Mar 2014 Posts: 167 Location: USA
Posted: Thu Nov 27, 2014 2:50 Post subject:
YaddaMinski wrote: Is the user's router dual band? That is my question. With Full 20 2.4 Ghz should get over 100 mbps no?
2.4Ghz Full 20 is wireless N 150
wireless N 300 tops out at 90Mbps both ways in theory _________________ Router: Buffalo WZR-300HP w/ DD-WRT build #28444
Back to top
tatsuya46 DD-WRT Guru Joined: 03 Jan 2010 Posts: 7568 Location: YWG, Canada
Posted: Thu Nov 27, 2014 4:53 Post subject:
evilkitty wrote: YaddaMinski wrote: Is the user's router dual band? That is my question. With Full 20 2.4 Ghz should get over 100 mbps no?
2.4Ghz Full 20 is wireless N 150
wireless N 300 tops out at 90Mbps both ways in theory
1x1:1 72/65 -> 2x2:2 144/130 -> 3x3:3 216/195 (short GI yes/no) for ht20
i get 155mbps throughput @ n 300 _________________LATEST FIRMWARE(S)
BrainSlayer wrote: we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers
[x86_64] Haswell i3-4150/QCA9984/QCA9882 ------> r55488 std
[QUALCOMM] DIR-862L --------------------------------> r55460 std
▲ ACTIVE / INACTIVE ▼
[QUALCOMM] WNDR4300 v1 --------------------------> r50485 std
[BROADCOM] DIR-860L A1 ----------------------------> r50485 std
Sigh.. why do i exist anyway.. | I love you Anthony.. never forget that.. my other 99% that ill never see again..
Back to top