Joined: 27 Jun 2013 Posts: 34 Location: Besancon France
Posted: Tue Dec 02, 2014 19:29 Post subject: GPIO 4 broken
In a process to make SDMOD on a WRT54GS v1.0,
I was not able to wire directly on RP3.
So I followed printed circuit track and try to connect on it (see photo).
I check with script :
Code:
#!/bin/sh
while true
do
gpio enable $1
sleep 1
gpio disable $1
sleep 1
done
evry points where OK , but soldering was difficult as well.
Finally GPIO 4 was not working any more. No idea what I broke !
Router still working
need to know : what is the consequence of no GPIO 4 ,
what to check to fix it.
Joined: 27 Jun 2013 Posts: 34 Location: Besancon France
Posted: Fri Dec 05, 2014 19:36 Post subject: GPIO Fixed but no more LAN_WAN
After chirigural work in soldering I finaly managed to mount SD Card ..... BUT
Sodering being realy a pain, I finaly toasted resistor pack RP3 and lost ethernet . Attempting to bypass the broken resistor failed .
WiFi works perfectly and I do not use wired ports
But .. I need to flash the firmware to get a build supporting mmc !
the big question : IS IT POSSIBLE TO FLASH WITH ONLY WIFI CONNECTION ??????