[zjmask]

I flash my WNR2000 v3 with wnr2000v3-factory_WW.img(11-20-2014-r25408),then I start to flash the rooter with wnr2000v3-webflash.bin(11-20-2014-r25408 ),it does not work.then I try all the wnr2000v3-webflash.bin release in 2014 but none works.
I see someone said wnr2000v3-webflash.bin should smaller than 3715100 bytes,so I find a modify firmware the size is 3477532 bytes,but it does not work too.
Does anyone know why and how to fix this problem

ps:someone said I should start with r18777(I did't try this way yet)

By the way anyone can tell me what's the different between wnr2000v3-factory_WW.img and webflash.bin version ,because wnr2000v3-factory_WW.img looks ok on my rooter

[bdflex]

I have the same exact problem as you. I have a WNR2000V3 running build 25544. Flashed with wnr2000v3-factory_NA.img but I can't seem to flash the webflash file. The Web Gui just hangs and after about 10 minutes I get an upgrade failure. I've tried it in ie, firefox, chrome, all the same. I have tried to revert back to factory to try build 18777 but nothing has worked for me. While trying to flash back the netgear firmware, TFTP shows that the firmware was successfully updated but my routers power light continuously flashes green. From what i understand it's supposed to reboot but it doesn't and ddwrt remains. Any ideas anyone?

[zjmask]

I final konw how to fix this problem
telnet to the rooter flash it use write command
ps:I use a shrink fw