Webflash without settings reset: bad flash - router bricket
Router has begun rebooting repeatedly every 2-3 seconds, all lights on, no light on, only power light on, all lights on again, i search solution to repair that, 30/30/30 reset don't work.
same result here with same hardware. Was at near end of december 2014
Webflash without settings reset: bad flash - router bricket
Router has begun rebooting repeatedly every 2-3 seconds, all lights on, no light on, only power light on, all lights on again, i search solution to repair that, 30/30/30 reset don't work.
same result here with same hardware. Was at near end of december 2014
Oh God, one more here... Same Hardware, same settings, same result...
Webflash without settings reset: bad flash - router bricket
Router has begun rebooting repeatedly every 2-3 seconds, all lights on, no light on, only power light on, all lights on again, i search solution to repair that, 30/30/30 reset don't work.
on my WDR4300 if I press reset/WPS as soon as the second led power up, just before flashing, the WPS led come on and I'm not going into the never ending booting loop
on my WDR4300 if I press reset/WPS as soon as the second led power up, just before flashing, the WPS led come on and I'm not going into the never ending booting loop
router doesn't respond to ping
google "wdr4300v1_tp_recovery.bin" and read up on builtin bootloader recovery.
Joined: 24 Feb 2013 Posts: 1634 Location: Belgrade
Posted: Thu Jan 29, 2015 20:38 Post subject:
Router: routers from sig
Status: OK
Reset: from webGUI (factory defaults) meaning erased nvram before upgarding
Errors: none so far for last 10 or more builds except Custom DDNS (dns-o-matic). I must manually press aply button to make it work. I will not cry or write ticket (for now) because it is not so important... there are people that has bricked routers...
Thanks devs, realy injoing using ddwrt... wifi working very fast... VPN server, QOS, UPnP, Guest wifi, Serbian language, Remote Syslog, everything I need...
Errors: none so far for last 10 or more builds except Custom DDNS (dns-o-matic). I must manually press aply button to make it work.
Thanks devs, realy injoing using ddwrt... wifi working very fast... VPN server, QOS, UPnP, Guest wifi, Serbian language, Remote Syslog, everything I need...
does that mean that you have to update DDNS manually and hit Apply day to day? I followed your instruction for dns-o-matic however I’m still at r25974 so does r25974 work correctly Custom/dns-o-matic, please advise