How to Unbrick Tp-link WA801nd version 2 without soldering.

Post new topic   Reply to topic    DD-WRT Forum Index -> Hardware DIY / Hardware Mods
Author Message
harris
DD-WRT Novice


Joined: 18 Jan 2015
Posts: 2

PostPosted: Sat Jan 31, 2015 11:27    Post subject: How to Unbrick Tp-link WA801nd version 2 without soldering. Reply with quote
Hi to everyone!

you need:
1.Cable ca-42 nokia
2.The TFTP Server by solarwinds http://www.solarwinds.com
3.TL-WA801ND_V2_120524 firmware http://www.tp-link.com/lk/support/download/?model=TL-WA801ND&version=V2#tbl_j USE THIS!
4.Ethernet cable
5.Hyperlink program

My cable ca-42 has 3 wires black red and white
Black GND, Red TX & White Rx
Use the TX to RX and TX to RX on router.
(For my example the red wire is in the middle.)

a) Put the firmware inside the folder TFTP-Root (original folder by TFTP) and rename it with hellas.bin
b) Connect ethernet cable and change your ip on your computer with
192.168.1.100
255.255.255.0
192.168.1.111
c) Run hyperlink with comx (for me is com4) 115200 8 none 1 none
d) Start router and quick write TPL enter (the prompt WASP appears for me) if don't restart router and try again.
e) Write these commands:
setenv serverip 192.168.1.100; setenv ipaddr 192.168.1.111
tftp 0x80800000 hellas.bin
erase 0x9f020000 +0x3c0000
cp.b 0x80800000 0x9f020000 0x3c0000
reset

Now your router is back with the first original firmware by tp-link.

good luck
Harris ( http://www.bonsaiforum.gr )
Sponsor
redstrat984
DD-WRT Novice


Joined: 10 Jul 2014
Posts: 12

PostPosted: Mon Sep 21, 2015 8:54    Post subject: Reply with quote
hi
i ma tryng ti reload default firmware whit this procedure....
but my device stuck on loading.....

no load firmware...
can you help me

thanks
redstrat984
DD-WRT Novice


Joined: 10 Jul 2014
Posts: 12

PostPosted: Mon Sep 21, 2015 10:00    Post subject: Reply with quote
this is the screen of error
gabrirusti
DD-WRT Novice


Joined: 01 Mar 2016
Posts: 1

PostPosted: Thu Mar 03, 2016 17:45    Post subject: Re: How to Unbrick Tp-link WA801nd version 2 without solderi Reply with quote
harris wrote:
Hi to everyone!

you need:
1.Cable ca-42 nokia
2.The TFTP Server by solarwinds http://www.solarwinds.com
3.TL-WA801ND_V2_120524 firmware http://www.tp-link.com/lk/support/download/?model=TL-WA801ND&version=V2#tbl_j USE THIS!
4.Ethernet cable
5.Hyperlink program

My cable ca-42 has 3 wires black red and white
Black GND, Red TX & White Rx
Use the TX to RX and TX to RX on router.
(For my example the red wire is in the middle.)

a) Put the firmware inside the folder TFTP-Root (original folder by TFTP) and rename it with hellas.bin
b) Connect ethernet cable and change your ip on your computer with
192.168.1.100
255.255.255.0
192.168.1.111
c) Run hyperlink with comx (for me is com4) 115200 8 none 1 none
d) Start router and quick write TPL enter (the prompt WASP appears for me) if don't restart router and try again.
e) Write these commands:
setenv serverip 192.168.1.100; setenv ipaddr 192.168.1.111
tftp 0x80800000 hellas.bin
erase 0x9f020000 +0x3c0000
cp.b 0x80800000 0x9f020000 0x3c0000
reset

Now your router is back with the first original firmware by tp-link.

good luck
Harris ( http://www.bonsaiforum.gr )




Hi, where do I connect tx and rx on the router?
tnx 1k
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Hardware DIY / Hardware Mods All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum