New build is out 26125 (BS) K2.6 and K3.X

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2  Next
Author Message
kt_haddock
DD-WRT Guru


Joined: 25 Dec 2009
Posts: 710

PostPosted: Mon Feb 02, 2015 15:29    Post subject: New build is out 26125 (BS) K2.6 and K3.X Reply with quote
ftp://ftp.dd-wrt.com/betas/2015/02-02-2015-r26125/


This build thread is for reporting successes and problem with loading this experimental test build. This is important info for developers and users. Always state your hardware and SPECIFIC build. (eg: 26125_NEWD-2_K2.6_mega-nv64k.bin). Do not ask questions about your specific router or how to configure it in this thread; create your own thread to discuss any specific problems you have or need resolved. This thread is to report info, not to seek it. Posts that do not add to understanding this build will be deleted. Make sure you know how to flash properly and the risk before using this build. It is important to adhere to these requirements, to keep this thread from becoming impossibly long and useless.
If you don't know what build to flash and how to flash properly and have a means of recovery if things should go wrong, do NOT flash this experimental test build.

_________________
[I prefer answere in whole sentence]
Sponsor
redhawk0
DD-WRT Guru


Joined: 04 Jan 2007
Posts: 11563
Location: Wherever the wind blows- North America

PostPosted: Mon Feb 02, 2015 15:31    Post subject: Reply with quote
Been running it a few hours now (downloaded from nightly)....so far...this is running super smooth on all my broadcom v24, K26, K3.x and Atheros (K3.10) units...nice builds.

redhawk

_________________
The only stupid question....is the unasked one.
kt_haddock
DD-WRT Guru


Joined: 25 Dec 2009
Posts: 710

PostPosted: Mon Feb 02, 2015 15:34    Post subject: Reply with quote
RT-AC87U missing in map:
ftp://ftp.dd-wrt.com/betas/2015/02-02-2015-r26125/asus-rt-ac87u/

_________________
[I prefer answere in whole sentence]
ddaniel51
DD-WRT Guru


Joined: 19 Feb 2013
Posts: 1464

PostPosted: Mon Feb 02, 2015 17:20    Post subject: Reply with quote
Loaded 26125 on both R7000's.

Lost the WAN activity LED on both R7000's in main and AP mode.

Also getting "eth3: No such device" notices on main 7000 only.

AP 7000 with wan port set to lan is running clean.


Had to load 26093 back on main.

Dave

_________________
Segment 1 XR700 10Gb LAN, 1Gb WAN ISP BS
Wired AP 1 Unifi Wifi 6 LR US 1Gb LAN
Wired AP 2 Unifi Wifi 6 LR US 1Gb LAN
Wired AP 3 Unifi Wifi 6 LR US 1Gb LAN
Syslog Services Asustor 7110T NAS 10GB
NetGear XS716T 10GB Switch
download1.dd-wrt.com/dd-wrtv2/downloads/betas/ (Brain Slayer)
YAMon https://usage-monitoring.com/index.php
colnago
DD-WRT User


Joined: 23 Oct 2014
Posts: 98

PostPosted: Mon Feb 02, 2015 17:40    Post subject: Reply with quote
Router Model: EA6500 v1

Status: ok
Reset: no
Errors: no

Flashed in GUI from v25974 (which had been up and running since released on Jan 20th). LAN, WAN, Wireless, VPN client ok. Thank you.
Agarwaen
DD-WRT Novice


Joined: 15 Jul 2012
Posts: 17
Location: Berlin

PostPosted: Mon Feb 02, 2015 18:00    Post subject: Reply with quote
Router: ASUS RT-AC66U
Firmware: dd-wrt-26125-Asus_RT-AC66U
Status: Working
Reset: No
Errors: None
Previous: Build 25974

Just needed another Router restart to get the GUI working!

_________________
Asus RT-AC66U -> Build 27805
Anti-Ultimate
DD-WRT User


Joined: 11 Oct 2014
Posts: 51

PostPosted: Mon Feb 02, 2015 18:18    Post subject: Reply with quote
ddaniel51 wrote:
Loaded 26125 on both R7000's.

Lost the WAN activity LED on both R7000's in main and AP mode.

Also getting "eth3: No such device" notices on main 7000 only.

AP 7000 with wan port set to lan is running clean.


Had to load 26093 back on main.

Dave


Didn't get the eth3 error but I can confirm the WAN LED is not working.
slobodan
DD-WRT Guru


Joined: 03 Nov 2011
Posts: 1555
Location: Zwolle

PostPosted: Mon Feb 02, 2015 20:46    Post subject: Reply with quote
E4200 flashed with dd-wrt.v24-26125_NEWD-2_K3.x_mega-e4200.bin (no reset):

ssh is ok;
WiFi seems ok;
Ethernet is ok;
Site Survey is ok;
WiViz is ok;
Jffs is gone;
mounting CIFS share to /mnt/smbshare is ok; Services/USB no longer displays garbage characters for the mounted share (twice).

My E4200 is bridged by Ethernet cable to another router, so I did not test its DHCP client.

_________________
2 times APU2 Opnsense 21.1 with Sensei

2 times RT-AC56U running DD-WRT 45493 (one as Gateway, the other as AP, both bridged with LAN cable)

3 times Asus RT-N16 shelved

E4200 V1 running freshtomato 2020.8 (bridged with LAN cable)

3 times Linksys WRT610N V2 converted to E3000 and 1 original E3000 running freshtomato 2020.8 (bridged with LAN cable)


Slacker
DD-WRT Novice


Joined: 01 Feb 2015
Posts: 4

PostPosted: Mon Feb 02, 2015 21:00    Post subject: Reply with quote
Router: ASUS RT-AC66U
Firmware: dd-wrt-26125-Asus_RT-AC66U
Status: Working
Reset: No
Errors: None so far
Previous: Build 26081
stalonge
DD-WRT Guru


Joined: 21 Jul 2006
Posts: 1898
Location: Fortaleza Ce Brazil

PostPosted: Mon Feb 02, 2015 22:24    Post subject: Reply with quote
My WZR1750 works with this build using AC for client bridge and 2.4 as a AP ...


Very Happy Very Happy

_________________
DDwrt ...it rocks ....

1 R7800 54420 AP Wireguard webserver JFFS SAMBA FTP usb HD Mesh
1 R7800 54420 Cli Mesh
1 WZR1750 54389 AP Webserver Samba Wireguard
1 TP link Archer C7v5 54420 Cli Mesh
1 DD x86_64 48296 Gateway Samba Ftp Webserver
tmi
DD-WRT Novice


Joined: 25 Aug 2008
Posts: 18

PostPosted: Mon Feb 02, 2015 23:17    Post subject: Buffalo WZR-600DHP - no WAN Reply with quote
Router: Buffalo WZR-600DHP
Firmware: wzr-600dhp-dd-wrt-webupgrade-MULTI.bin
Status: no WAN in DHCP mode, all other functions normal
Errors: None
Previous: Build 26081
tmi
DD-WRT Novice


Joined: 25 Aug 2008
Posts: 18

PostPosted: Mon Feb 02, 2015 23:22    Post subject: Buffalo WZR-HP-AG300H Reply with quote
Router Model: Buffalo WZR-HP-AG300H
Firmware Version: DD-WRT v24-sp2 (02/02/15) std - build 26125
Kernel Version: Linux 3.10.67-rc1 #8142 Mon Feb 2 02:03:56 CET 2015 mips \

Setup: WAN disabled, WAN Port assigned to Switch
Status: WAN as a switch port and all other functions normal
Errors: None
Previous: Build 26081
dugless
DD-WRT Novice


Joined: 25 Jul 2014
Posts: 14
Location: United States

PostPosted: Mon Feb 02, 2015 23:59    Post subject: Reply with quote
R7000
Wan activity led not working. Guest wireless 2.4 and 5.0 not working. No other problems noted.
robo77
DD-WRT Novice


Joined: 24 Dec 2013
Posts: 31

PostPosted: Tue Feb 03, 2015 0:36    Post subject: Reply with quote
Router Model: Linksys EA2700
Unable to flash with r26125 or r26081 return to stock firmware or get router soft brick.
_Robb_
DD-WRT User


Joined: 14 Jan 2012
Posts: 324
Location: Wr PL

PostPosted: Tue Feb 03, 2015 2:05    Post subject: Reply with quote
Running 4h now.

IPV6 - on laptop IPv6 dns entry is empty.

Code:
bin/iperf.exe -c 192.168.1.18 -P 1 -i 1 -m -p 5001 -N -f m -t 30 -T 1 -S 0x04
------------------------------------------------------------
Client connecting to 192.168.1.18, TCP port 5001
TCP window size: 0.06 MByte (default)
------------------------------------------------------------
[228] local 192.168.1.17 port 6494 connected with 192.168.1.18 port 5001
[ ID] Interval       Transfer     Bandwidth
[228]  0.0- 1.0 sec  46.9 MBytes   393 Mbits/sec
[228]  1.0- 2.0 sec  45.0 MBytes   377 Mbits/sec
[228]  2.0- 3.0 sec  41.9 MBytes   351 Mbits/sec
[228]  3.0- 4.0 sec  46.8 MBytes   392 Mbits/sec
[228]  4.0- 5.0 sec  46.4 MBytes   389 Mbits/sec
[228]  5.0- 6.0 sec  46.1 MBytes   387 Mbits/sec
[228]  6.0- 7.0 sec  47.5 MBytes   398 Mbits/sec
[228]  7.0- 8.0 sec  46.5 MBytes   390 Mbits/sec
[228]  8.0- 9.0 sec  47.1 MBytes   395 Mbits/sec
[228]  9.0-10.0 sec  47.1 MBytes   395 Mbits/sec
[228] 10.0-11.0 sec  45.8 MBytes   384 Mbits/sec
[228] 11.0-12.0 sec  48.3 MBytes   405 Mbits/sec
[228] 12.0-13.0 sec  47.3 MBytes   396 Mbits/sec
[228] 13.0-14.0 sec  46.0 MBytes   386 Mbits/sec
[228] 14.0-15.0 sec  45.0 MBytes   377 Mbits/sec
[228] 15.0-16.0 sec  45.6 MBytes   383 Mbits/sec
[228] 16.0-17.0 sec  47.0 MBytes   394 Mbits/sec
[228] 17.0-18.0 sec  48.6 MBytes   408 Mbits/sec
[228] 18.0-19.0 sec  48.3 MBytes   405 Mbits/sec
[228] 19.0-20.0 sec  48.6 MBytes   408 Mbits/sec
[228] 20.0-21.0 sec  47.8 MBytes   401 Mbits/sec
[228] 21.0-22.0 sec  48.5 MBytes   407 Mbits/sec
[228] 22.0-23.0 sec  46.1 MBytes   387 Mbits/sec
[228] 23.0-24.0 sec  47.3 MBytes   396 Mbits/sec
[228] 24.0-25.0 sec  46.3 MBytes   388 Mbits/sec
[228] 25.0-26.0 sec  45.8 MBytes   384 Mbits/sec
[228] 26.0-27.0 sec  46.5 MBytes   390 Mbits/sec
[228] 27.0-28.0 sec  48.6 MBytes   408 Mbits/sec
[228] 28.0-29.0 sec  48.0 MBytes   403 Mbits/sec
[228] 29.0-30.0 sec  47.6 MBytes   400 Mbits/sec
[228]  0.0-30.0 sec  1404 MBytes   392 Mbits/sec
[228] MSS size 1460 bytes (MTU 1500 bytes, ethernet)
Done.

_________________
http://www.speedtest.net/result/3915993898.png

DO NOT 30-30-30 or erase nvram newer routers! It can brick them.

EA6700: Build 27745 (nvram below 32K, ipv6 - HE 6in4)
E4200: Build 26587
WRT54GL: Retired - waiting in the closet for an emergency.
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum