[Maxfire2020]

hi,

after i bricked my 3000 router i make Serial Recovery
but i get this output non stop :



CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Tue Jul 27 16:07:16 CST 2010 (ljh@team2-complier)
Copyright (C) 2000-2008 Broadcom Corporation.

Init Arena
Init Devs.

No DPN
This is a Parallel Flash
Boot partition size = 262144(0x40000)
CPU type 0x19740: 133MHz
Tot mem: 65536 KBytes

CFE mem: 0x80700000 - 0x8079DAC0 (645824)
Data: 0x80732A20 - 0x80737080 (18016)
BSS: 0x80737080 - 0x80737AC0 (2624)
Heap: 0x80737AC0 - 0x8079BAC0 (409600)
Stack: 0x8079BAC0 - 0x8079DAC0 (8192)
Text: 0x80700000 - 0x80732A1C (207388)

Boot version: v4.2
The boot is CFE

mac_init(): Find mac [C0:C1:C0:0B:0A:77] in location 0
Nothing...
country_init(): Find country code in location 0
The country is same
**Exception 8: EPC=80715648, Cause=80008008 (TLBMissRd)
RA=80715650, VAddr=0000000C

0 ($00) = 00000000 AT ($01) = 80730000
v0 ($02) = 00000000 v1 ($03) = 00000000
a0 ($04) = 80738C80 a1 ($05) = 8072CAB9
a2 ($06) = 00000001 a3 ($07) = 00000005
t0 ($0 = 00000000 t1 ($09) = 00000000
t2 ($10) = 807322B0 t3 ($11) = 00000000
t4 ($12) = 00000000 t5 ($13) = 48534C46
t6 ($14) = 9FC036BC t7 ($15) = FFD7DBCF
s0 ($16) = 00000000 s1 ($17) = 00000000
s2 ($1 = 8072CA8C s3 ($19) = 8072CA68
s4 ($20) = 8079D880 s5 ($21) = 8079D880
s6 ($22) = 00004716 s7 ($23) = 00000001
t8 ($24) = 04000000 t9 ($25) = 00000000
k0 ($26) = FFFFFFFF k1 ($27) = FFFFFFFF
gp ($2 = 8073AA20 sp ($29) = 8079D858
fp ($30) = 00000000 ra ($31) = 80715650



CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Tue Jul 27 16:07:16 CST 2010 (ljh@team2-complier)
Copyright (C) 2000-2008 Broadcom Corporation.


i search if i can use usb blaster JTAG but i don't know how also tjtag have error massage

im lost can someone help ?[/code]

[Malachi]

I've had that before on a couple of e3000.
Read this, look for Eko's post http://www.dd-wrt.com/phpBB2/viewtopic.php?t=63371&postdays=0&postorder=asc&start=0

[Maxfire2020]

thank you for the replay i tray many times but there are no response also i cant ping 192.168.1.1

HOW TO RECOVER WRT610N

- plug power in
- wait 1-2s
- press reset button
- keep pressing for 5s
- open your browser at 192.168.1.1
- upload new firmware

any suggestions ?