Joined: 15 Jun 2015 Posts: 22 Location: Beijing, China
Posted: Sat Jun 20, 2015 15:01 Post subject: [SOLVED] DIR-868L bricked need for help
Since I update my DIR-868L to 06-15-2015-r27297, my DIR-868L was bricked.
I've tried 30-30-30 reset many times, but didn't work.
After 30-30-30 reset, my DIR-868L got ping response by 192.168.1.1, and TTL=100. But.
1. There's seems no tftp exist. When I try to upload fireware by tftp(tftp -i 192.168.1.1 put xxxx.bin), I got a timeout error. And I try "telnet 192.168.1.1 69", also got timeout.
2. Thers's seems no factory web UI, open http://192.168.1.1, I got no response. Also I try "telnet 192.168.1.1 80", timeout too.
So, I've no idea to have my DIR-868L recovery.
Anyone could help me to get my DIR-868L back?
Last edited by leonanu on Sun Jun 21, 2015 15:01; edited 1 time in total
Should mention IP matters.. what your computer is set to before the restart.. Like my R7000 there is someway of serving up a firmware image to it if my ip is 192.168.2.1 via a tftp server. It will only look for a tftp server on that ip and no other.
Joined: 15 Jun 2015 Posts: 22 Location: Beijing, China
Posted: Sat Jun 20, 2015 15:48 Post subject:
Jerky_san wrote:
http://forums.dlink.com/index.php?topic=44909.0
Should mention IP matters.. what your computer is set to before the restart.. Like my R7000 there is someway of serving up a firmware image to it if my ip is 192.168.2.1 via a tftp server. It will only look for a tftp server on that ip and no other.
I can't visit the forums
For my DIR-868L, I've tried 192.168.2.1, no response. Only 192.168.1.1 could response.
1. Plug the Ethernet cable that connects your computer, that was plugged into one of the LAN ports,
2. Setup your PC with static IP - ex: 192.168.0.2 (different from 192.168.0.1)
3. Make sure the PC has the new firmware
4. Unplug the power
5. Hold the reset button for 3~5 seconds and re plug the power WITHOUT RELEASING THE RESET BUTTON.
6.Open a web browser to 192.168.0.1 and then you should see EMERGENCY FLASHING page then click browse/upload locate the file and click UPLOAD FIRMWARE NOW
Joined: 15 Jun 2015 Posts: 22 Location: Beijing, China
Posted: Sat Jun 20, 2015 16:01 Post subject:
Jerky_san wrote:
1. Plug the Ethernet cable that connects your computer, that was plugged into one of the LAN ports,
2. Setup your PC with static IP - ex: 192.168.0.2 (different from 192.168.0.1)
3. Make sure the PC has the new firmware
4. Unplug the power
5. Hold the reset button for 3~5 seconds and re plug the power WITHOUT RELEASING THE RESET BUTTON.
6.Open a web browser to 192.168.0.1 and then you should see EMERGENCY FLASHING page then click browse/upload locate the file and click UPLOAD FIRMWARE NOW
Joined: 15 Jun 2015 Posts: 22 Location: Beijing, China
Posted: Sun Jun 21, 2015 15:01 Post subject:
Jerky_san wrote:
1. Plug the Ethernet cable that connects your computer, that was plugged into one of the LAN ports,
2. Setup your PC with static IP - ex: 192.168.0.2 (different from 192.168.0.1)
3. Make sure the PC has the new firmware
4. Unplug the power
5. Hold the reset button for 3~5 seconds and re plug the power WITHOUT RELEASING THE RESET BUTTON.
6.Open a web browser to 192.168.0.1 and then you should see EMERGENCY FLASHING page then click browse/upload locate the file and click UPLOAD FIRMWARE NOW