Joined: 24 Oct 2008 Posts: 1079 Location: Latin America
Posted: Tue Jun 09, 2015 23:17 Post subject: Pulsar el botón negro mientras se enciende
Es un procedimiento análogo al empleado para cargarle una ROM a un celular:
Quote:
Put the router in recovery mode: Unplug the power cord of the router. Hold down the black Restore button using a pen (not the red button). Plug the power cord back in. Once the power light starts flashing slowing, release the Restore button. The power light should continue to flash. The flashing light means the router is ready to accept the new firmware in recovery mode.
Click the upload button in the Restoration utility. If it warns about incorrect Asus firmware, ignore it. The firmware should now start uploading into the router. Don’t touch anything while the firmware is being uploaded.
_________________ If you want support, please read first the announcements and forum rules.
Si usted desea ayuda, por favor lea primero los anuncios y las reglas del foro.
Posted: Wed Jun 10, 2015 19:41 Post subject: Re: Pulsar el botón negro mientras se enciende
feliciano wrote:
Es un procedimiento análogo al empleado para cargarle una ROM a un celular:
Quote:
Put the router in recovery mode: Unplug the power cord of the router. Hold down the black Restore button using a pen (not the red button). Plug the power cord back in. Once the power light starts flashing slowing, release the Restore button. The power light should continue to flash. The flashing light means the router is ready to accept the new firmware in recovery mode.
Click the upload button in the Restoration utility. If it warns about incorrect Asus firmware, ignore it. The firmware should now start uploading into the router. Don’t touch anything while the firmware is being uploaded.
Hola que tal gracias por tu respuesta.
Entonces esto quiere decir que es el unico metodo par realizar el Flash de FW; no se puede hacer mediante la pagina o interfaz web que tiene el Router.
Joined: 24 Oct 2008 Posts: 1079 Location: Latin America
Posted: Fri Jun 12, 2015 1:29 Post subject: A los fabricantes no les gusta que uno cambie el firmware
A los fabricantes no les gusta que uno cambie el firmware de sus equipos, así que incorporan mecanismos de validación que sólo pueden ser evitados con un firmware "firmado", o desde la página de recuperación.
Yo no he trabajado con este router en particular, pero ese es el concepto. _________________ If you want support, please read first the announcements and forum rules.
Si usted desea ayuda, por favor lea primero los anuncios y las reglas del foro.