Your reports for Qualcomm/Atheros units are highly appreciated !
Router:
Firmware:
Kernel:
Status:
Reset:
Errors: _________________ THERE ARE NO STRANGERS HERE; ONLY FRIENDS YOU HAVEN'T YET MET.
________________________________________________________________________________________________________
DD-WRT CHANGELOG | DEVICES | DD-WRT BUILDS | KONG BUILDS | UNOFFICIAL BUILDS | DD-WRT in VIRTUALBOX
Last edited by KrypteX on Thu Nov 26, 2015 8:43; edited 3 times in total
WNDR3700 V4
DD-WRT v3.0-r28211 std (11/16/15)
Linux 3.10.93 #11472 Mon Nov 16 06:40:42 CET 2015 mips
update live over 28139
using as main router
All seems good...both radios good.
uptime 1:29
Recursive DNS Resolving (same as before) must 'Apply Settings' after
a reboot before DNS will resolve local.
unbound.conf only shows local-data for router name
and nothing for other static leases until you 'Apply Settings' then its all
good and never misses a beat unless you do a reboot.
EDIT: Still working fine - uptime 8:49 .. added notes about ¬
Recursive DNS Resolving -- I think tatsuya46 was correct when he mentioned a
while back, "It might be a race condition"
I can't find a problem other than from a reboot unbound always startup a few seconds
after dnsmasq but when you do an 'Appy Setting' in GUI in Services page they both start
at same time (second). In this 'log from 28139 ' (scroll down it's highlighted)
after the apply settings unbound is logged starting after dnsmasq -- but at same time.
In this snippet of the log for build 28211 you can see unbound is actually logged starting back
before dnsmasq but still at the same time ----
Nov 17 04:00:29 -- kern.info kernel: [ 47.880000] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
Nov 17 04:00:30 -- user.debug : ttraff: data collection started
Nov 17 04:00:47 -- user.info : klogd : kernel log daemon successfully stopped
Nov 17 04:00:47 -- kern.notice kernel: klogd: exiting
Nov 17 04:00:47 -- user.info : ttraff : traffic counter daemon successfully stopped
Nov 17 04:00:47 -- user.info : ttraff : traffic counter daemon successfully started
Nov 17 04:00:47 -- user.info : syslogd : syslog daemon successfully stopped
Nov 16 22:00:47 -- syslog.info syslogd exiting
Nov 16 22:00:47 -- syslog.info syslogd started: BusyBox v1.24.1
Nov 17 04:00:47 -- kern.notice kernel: klogd started: BusyBox v1.24.1 (2015-11-16 06:40:59 CET)
Nov 17 04:00:48 -- user.info : vpn modules : vpn modules successfully unloaded
Nov 17 04:00:48 -- user.info : vpn modules : nf_conntrack_proto_gre successfully loaded
Nov 17 04:00:48 -- user.info : vpn modules : nf_nat_proto_gre successfully loaded
Nov 17 04:00:48 -- user.info : vpn modules : nf_conntrack_pptp successfully loaded
Nov 17 04:00:48 -- user.info : vpn modules : nf_nat_pptp successfully loaded
Nov 17 04:00:48 -- user.info : dropbear : ssh daemon successfully stopped
Nov 17 04:00:48 -- user.info : telnetd : telnet daemon successfully stopped
Nov 17 04:00:48 -- authpriv.info dropbear[1081]: Early exit: Terminated by signal
Nov 17 04:00:48 -- user.info : pptpd : pptp daemon successfully stoped
Nov 17 04:00:48 -- user.info : unbound : unbound daemon successfully stopped
Nov 17 04:00:48 -- user.info : dnsmasq : dnsmasq daemon successfully stopped
Nov 17 04:00:49 -- user.info : pptpd : pptp daemon successfully stoped
Nov 17 04:00:49 -- user.info : telnetd : telnet daemon successfully started
Nov 17 04:00:49 -- user.info : dropbear : ssh daemon successfully started
Nov 17 04:00:49 -- authpriv.info dropbear[3564]: Running in background
Nov 17 04:00:49 -- user.info : unbound : recursive dns resolver daemon successfully started
Nov 17 04:00:49 -- user.info : dnsmasq : dnsmasq daemon successfully started
Nov 17 04:00:50 -- user.info : vpn modules : vpn modules successfully unloaded
Nov 17 04:00:50 -- user.info : vpn modules : nf_conntrack_proto_gre successfully loaded
Nov 17 04:00:50 -- user.info : vpn modules : nf_nat_proto_gre successfully loaded
Nov 17 04:00:50 -- user.info : vpn modules : nf_conntrack_pptp successfully loaded
Nov 17 04:00:50 -- user.info : vpn modules : nf_nat_pptp successfully loaded
Nov 17 04:00:50 -- user.info : klogd : kernel log daemon successfully stopped
Nov 17 04:00:50 -- kern.notice kernel: klogd: exiting
Nov 17 04:00:50 -- user.info : syslogd : syslog daemon successfully stopped
Nov 16 22:00:50 -- syslog.info syslogd exiting
Nov 16 22:00:50 -- syslog.info syslogd started: BusyBox v1.24.1
Nov 17 04:00:50 -- user.info : klogd : klog daemon successfully started
Nov 17 04:00:50 -- kern.notice kernel: klogd started: BusyBox v1.24.1 (2015-11-16 06:40:59 CET)
Nov 17 04:00:51 -- user.info : vpn modules : vpn modules successfully unloaded
Nov 17 04:00:51 -- user.info : vpn modules : nf_conntrack_proto_gre successfully loaded
Nov 17 04:00:51 -- user.info : vpn modules : nf_nat_proto_gre successfully loaded
and that's 'bout all I know
Last edited by mrjcd on Tue Nov 17, 2015 12:48; edited 1 time in total
Your reports for Qualcomm/Atheros units are highly appreciated !
Router:
Firmware:
Kernel:
Status:
Reset:
Errors:
I noticed you updated your signature for some of the TP-Link routers. Would you now recommend this build (28211) for the TP-Link WR841N or to stick with the 27506 build for the time being?
Firmware: DD-WRT v3.0-r28211 std (11/16/15)
Kernel : 3.18.23 #6136 Mon Nov 16 06:21:48 CET 2015 mips
Status : OK
Reset : NO
Errors : at boot wifi does not start,after i setup the wifi everithing is ok
maybe I am doing sometnig wrong, I would like if someone can try it too... example of configuring Hotspotsystem is very easy on ddwrt just a few clicks (you have it on bugreport) but you have to get account at hotspotsystem... it's free (basic and social)...
Router: Buffalo WZR-HP-G300NH
Firmware: DD-WRT v3.0-r28211 std (11/16/15)
Kernel: Linux 3.10.93 #11380 Mon Nov 16 04:21:37 CET 2015 mips
Status: OK
Reset: First try no, then reset bacause of brick.
Errors: As usual tried web upgrade, as usual bricked my router. Then hard reset + TFTP and ir works again.
Web upgrade did not worked for the past 6 or 7 months now, it always bricks my router.
Any ideas why is that? :/
Joined: 28 Jun 2011 Posts: 580 Location: Vilnius, Lithuania
Posted: Tue Nov 17, 2015 22:30 Post subject:
Router: TP-Link TL-WR842ND v2
Firmware: DD-WRT v3.0-r28211
Kernel: Linux 3.10.93 #11466
Status: OK
Reset: no
Errors: no
@Awrimukas: Had the same problem with a few builds the previous month. Had to TFTP. Can`t remember exactly build numbers. Last ~5 builds upgraded smoothly w/o reset or brick. BTW, around that time I started using Yamon and a flash drive so it might be related somehow. _________________ [Ramips] Nexx WT3020F Openwrt @kernel #4.14.167 (OpenVPN server, Wireguard server, AD blocking, SQM QOS, USB)
