Joined: 06 Jun 2006 Posts: 7463 Location: Dresden, Germany
Posted: Sat Nov 28, 2015 1:58 Post subject:
Mile-Lile wrote:
Upgraded without reset both of my units. Upgrade went fine. Errors: no new bugs but when using uDHCPd web UI reports that dhcp i disabled even with client connected?
stay away from udhcpd. it hasnt been touched over years. dnsmasq does support all features you need, and much more _________________ "So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
Joined: 24 Feb 2013 Posts: 1634 Location: Belgrade
Posted: Sat Nov 28, 2015 9:46 Post subject:
^^ Thx BS. I appreciate. I returned to DNSMasq and now it seems to work normal. I lowered MTU to 1480 (I am on ADSL)... seems like that was the problem (DSLAM)...
Status: not ok
Reset: no
Errors: 2,4Ghz ist working, 5Ghz not. Looks like there is just the ath0-Interface. ath1-interface is not present in the wireles-menu.
blackseven
P.S.: mac-adress and SSID in Picture are deleted by me before posting
Router: Buffalo wzr-hp-ag300h
Firmware: DD-WRT v3.0-r28366
CPU Model Atheros AR7161 rev 2 (0xaa)
Kernel: Linux 3.10.93 #12126 Fri Nov 27 04:30:27 CET 2015 mips
Status: Works at all
Reset: Yes per https://www.dd-wrt.com/wiki/index.php/Buffalo_WZR-HP-AG300H
Errors: don't know how
Upgrade from 15940 (stock Buffalo factory I think)
Using 29800kB (24%) mem
wired and wireless working, internet connects and works, 2.4Ghz is working, do not have 5Ghz although ath1 is shown.[/img]
I am new as you can see. If anyone has questions I will attempt to find answers. Slowly.
edit: 5Ghz is available and working on the phone. I had another build on the wndr3700v4 that did this. I do not remember which.
edit 2: configured router as client bridge and ath1.1 5GHz wireless virtual interface works now. Forgot to mention openvpn works fine also
Router: Buffalo WZR-HP-G300NH
Firmware:DD-WRT v3.0-r28366 std (11/27/15)
Kernel:Linux 3.10.93 #12122 Fri Nov 27 04:23:19 CET 2015 mips
Status: Not OK
Reset: Yes
Errors:
Upgraded from 28320 2015/11/25. Webupgrade to r28366 bricked the WZR-HP-G300NH which was not reset from 28320. 28320 was performing well with the exception of USB which did not work. Had to recover using TFTP after the webflash failed. Since applying 28366 I've had unstable performance. USB is fixed, but the router rebooted itself in less than a day, and I've been struggling with connectivity. Sorry I don't have more specifics, will keep troubleshooting.
If you have the Buffalo WZR-HP-G300NH, 28320 was a pleasant surprise, assuming you can live without without USB.