Router: Buffalo WZR-HP-G300NH
Firmware: DD-WRT v3.0-r28598 std (12/24/15)
Kernel: Linux 3.10.94 #14316 Thu Dec 24 03:23:18 CET 2015 mips
Status: OK
Reset: NO!
Errors: NO! Happy to see web upgrade working without bricking the router.
Merry Christmas everyone!
Which firmware revision did you upgrade from? _________________ Buffalo WZR-HP-G300NH - Firmware: DD-WRT v3.0-r29440 std (04/11/16)
_________________
Signature truncated: cannot exceed 20.000 lines!
Joined: 24 Feb 2013 Posts: 1634 Location: Belgrade
Posted: Sun Dec 27, 2015 20:04 Post subject:
Router: both from my sig
Reset: No
Errors: Just trying to catch 1 issue (memory draining)... Up 1 day and everything is OK but I used G-only... now switching to NG-mixed... wdsap ofcurse allways...
Posted: Sun Dec 27, 2015 20:13 Post subject: RTAC-87R with DD-WRT build 28598 - 2015/12/24
Router: ASUS RT-AC87R / RT-AC87U
Firmware: DD-WRT build 28598
Kernel: Linux 3.10.94 #5329 SMP Thu Dec 24 07:49:31 CET 2015 armv7l
Status: Working!
Reset: None.
Errors: None.
Just migrated away from asus / merlin builds and I am AMAZED by how responsive my router has just become. I was on the point of selling this unit, as it still struggles with quantenna drivers for 5ghz, even after 2 years. However, dd-wrt features help to compensate for that. Thanks for the good work. By the way, I am never buying asus router again. I cant believe how terrible their support for the quantenna has been.
Joined: 05 Oct 2008 Posts: 666 Location: Helsinki, Finland / nr. Alkmaar, Netherlands
Posted: Sun Dec 27, 2015 21:46 Post subject:
Awrimukas wrote:
Router: Buffalo WZR-HP-G300NH
Firmware: DD-WRT v3.0-r28598 std (12/24/15)
Kernel: Linux 3.10.94 #14316 Thu Dec 24 03:23:18 CET 2015 mips
Status: OK
Reset: NO!
Errors: NO! Happy to see web upgrade working without bricking the router.
Merry Christmas everyone!
Tried web gui upgrade first (from 28493 to 28598) without reset. Notwithstanding the report quoted above -> router bricked.
Next, like innumerable times before, I TFTP'd build 28598, which was succesful (settings gone, though).
For good measure, I had the router reset and reboot itself explicitely by: 'erase nvram && reboot'.
Then restored original settings (from a script generated earlier) and rebooted the router using the GUI.
It's up and running. Build 28493 ran for over a week w/o problems or rebooting.
Time will tell how this build performs ...
Router Model: Buffalo WZR-HP-G300NH
Firmware Version: DD-WRT v3.0-r28598 std (12/24/15)
Kernel Version: Linux 3.10.94 #14316 Thu Dec 24 03:23:18 CET 2015 mips
Router: ASUS RT-AC87U
Firmware: DD-WRT build 28598
Kernel: Linux 3.10.94 #5329 SMP Thu Dec 24 07:49:31 CET 2015 armv7l
Status: Working
Reset: yes, before and after
Errors: None for this moment
coming from STOCK
5ghz wifi can't disabled. If I disable it in the web gui, after a reboot it comes again active.
Our Android items can't see/connect the 5 ghz wifi, only my iPad can see/connect the 5 ghz wifi !!!
Ah you caught a good build, you will find its broken again after that. _________________ Buffalo WZR-HP-G300NH - Firmware: DD-WRT v3.0-r29440 std (04/11/16)
_________________
Signature truncated: cannot exceed 20.000 lines!
hardware: wzr-hp-ag300h
software: build 27745
upgrade: ok
reset: no
back on 27745
issues/errors:
- hostapd dies when free radius client connects (for several builds yet)
- no stable wireless connection for android clients (4+5); TX rate at 1M
not retested issues/errors
- radvd provides isp dns server (lollipop clients can't resolve internal names)
- wired windows 7 clients get isp dns server on resume from standby. wireless doesn't! (patched radvd.conf)
in summary continuously poor stability and reliability for all musl builds yet.
Posted: Mon Dec 28, 2015 12:25 Post subject: WZR-HP-G300NH tftp upgrade r28493 -> r28598
Router: Buffalo WZR-HP-G300NH
Firmware: DD-WRT v3.0-r28598 std
Kernel: Linux 3.10.94
Status: OK
Reset: erase nvram (before and after)
Errors: see below.
1) http://svn.dd-wrt.com/ticket/4742 still applies webupgrade from r28493 -> r28598 bricks router. this is now with erase nvram/reboot before and after
2) Openssl still complain that it has no configuration file...
Code:
~# openssl
WARNING: can't open config file: /etc/ssl/openssl.cnf
3) Applying wifi mac address filtering still goes to empty dialog, add some mac to list and click save.
Aside from these issues seems to be working OK. _________________ Buffalo WZR-HP-G300NH - Firmware: DD-WRT v3.0-r29440 std (04/11/16)
_________________
Signature truncated: cannot exceed 20.000 lines!
Last edited by un1versal on Tue Feb 02, 2016 11:49; edited 3 times in total
Router: Buffalo WZR-HP-AG300H
Firmware: r28598
Kernel: 3.10.94
Status: Ok
Reset: Yes
Errors: No
Upgraded from r27396
Ethernet, 2.4 and 5 GHz works
DHCP, SSHd, USB storage, SAMBA, FTP and DLNA works.
Site survey and Wiviz survey also work.
Haven't tested the other services to comment on them.
Problem: Somewhere between version 27775 and 28493 the DHCP server started having issues. It will forget IP's that are assigned. My Server 2012 box is running RRAS, and obtains 10 IP's from the DDWRT DHCP server to assign to VPN users. They will stay in the DHCP server for about 12 hours, then they disappear.