Linksys e1000v2 now supported

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Goto page Previous  1, 2, 3, 4, 5, 6, 7, 8  Next
Author Message
rcatank
DD-WRT Novice


Joined: 12 May 2013
Posts: 2

PostPosted: Mon May 13, 2013 3:52    Post subject: E1000 v2.1 FW? dd-wrt.v24-16758_NEWD-2_K2.6_mini_e1000v2.bin Reply with quote
Hi,

I just wanted to confirm that I should use the dd-wrt.v24-16758_NEWD-2_K2.6_mini_e1000v2.bin firmware for the first time if I have the Cisco E1000 V2.1.

I know a lot of people have confirmed this for E1000 V2, but not necessary confirmed working for v2.1.

Then Eko posted something about trial flashing dd-wrt.v24-16968_NEWD-2_K2.6_mini_e1000v2.bin for E1000 v2.1, which threw me for a loop as to which one should I flash for initial?

I appreciate a confirmation from previous flashers and or experienced moderators.

Thx

P.S. I'll be using the peacocks thread on flashing initial FW.
Sponsor
prateeksaurabh
DD-WRT Novice


Joined: 15 Nov 2011
Posts: 5

PostPosted: Thu May 16, 2013 4:39    Post subject: E1000V2 loses connection when PPPOE configured Reply with quote
Hello,
I just got a Linksys E1000 V2 (FCC= Q87-E1000V2) router. I got this router after i got to know this router supports VLAN Tagging (802.1q)http://www.dd-wrt.co.in/wiki/index.php/VLAN_Support.

I have flashed this router by dd-wrt.v24-16758_NEWD-2_K2.6_mini_e1000v2. I performed 30-30-30 before flashing and also after flashing was done.

The router keeps on rebooting its own. I dont see anybody facing similar issue here which makes me think have a made any mistake in flashing?

Also i got this from USA (17$) though i am in India and unfortunately the power adapter that came with this router is not working. So i have another power adapter lying at home which give 9V and 500mA of power though this unit requires 12V and 500mA.

Also i face this problem as soon as i plug in my modem and configure my PPPOE my router.

I have also changed my MTU size from 1492 (default as that is what is set up in my modem by ISP) to 1400 but still facing the same problem.

I had a word with a local router vendor who is trying to sell me a different router may be WRT54GL V 1.1 or Asus RT N-16 and he said E1000 is faulty and it reboots its own and now this product has been discontinued but its weird nobody has faced this issue here.
rcatank
DD-WRT Novice


Joined: 12 May 2013
Posts: 2

PostPosted: Thu May 16, 2013 4:41    Post subject: Re: E1000 v2.1 FW? dd-wrt.v24-16758_NEWD-2_K2.6_mini_e1000v2 Reply with quote
rcatank wrote:
Hi,

I just wanted to confirm that I should use the dd-wrt.v24-16758_NEWD-2_K2.6_mini_e1000v2.bin firmware for the first time if I have the Cisco E1000 V2.1.

I know a lot of people have confirmed this for E1000 V2, but not necessary confirmed working for v2.1.

Then Eko posted something about trial flashing dd-wrt.v24-16968_NEWD-2_K2.6_mini_e1000v2.bin for E1000 v2.1, which threw me for a loop as to which one should I flash for initial?

I appreciate a confirmation from previous flashers and or experienced moderators.

Thx

P.S. I'll be using the peacocks thread on flashing initial FW.



Confirmation to myself:

First flash dd-wrt.v24-16758_NEWD-2_K2.6_mini_e1000v2.bin for the E1000 v2.1

Then flash something better like:
dd-wrt.v24-17201_NEWD-2_K2.6_mini_e1000v2
mkrishanu
DD-WRT Novice


Joined: 12 Aug 2013
Posts: 2

PostPosted: Mon Aug 12, 2013 16:45    Post subject: cannot Reply with quote
Hi,
I tried to flash flash my Cisco E1000 V2.1 router Firmware Version: 2.1.02 with "dd-wrt.v24-16758_NEWD-2_K2.6_mini_e1000v2.bin"

But when it keeps saying upgrade failed. I am really new to this can anyone help pls.
Malitiacurt
DD-WRT User


Joined: 16 Aug 2012
Posts: 190

PostPosted: Mon Aug 12, 2013 19:17    Post subject: Re: cannot Reply with quote
mkrishanu wrote:
Hi,
I tried to flash flash my Cisco E1000 V2.1 router Firmware Version: 2.1.02 with "dd-wrt.v24-16758_NEWD-2_K2.6_mini_e1000v2.bin"

But when it keeps saying upgrade failed. I am really new to this can anyone help pls.


I hope you read the peacock thread.

I'm surprised you didn't brick it, that version is for v2, not v2.1.

See http://www.dd-wrt.com/phpBB2/viewtopic.php?t=138056

Don't quote me on this but I think you'll need build 16968 for the initial flash. I didn't bother reading the entire thread to find the correct build version.
mkrishanu
DD-WRT Novice


Joined: 12 Aug 2013
Posts: 2

PostPosted: Wed Aug 14, 2013 12:31    Post subject: Reply with quote
Thank you for your reply. I tried the "dd-wrt.v24-16968_NEWD-2_K2.6_mini_e1000v2.bin" and it worked with my Cisco 1000 v2.1

Thank your helping
brappinseven
DD-WRT Novice


Joined: 27 Mar 2012
Posts: 3

PostPosted: Fri Aug 16, 2013 9:33    Post subject: e1000 v2 wont port forward Reply with quote
Hey guys

ive just installed dd-wrt SVN revision 21061 on my cisco e1000, however it just wont port forward

have factory reset but still cant get it working

i can see them in the NAT list, however the ports just never open/forward.

have checked with multiple online port scans, including another server on a different internet connections i own

Any help would be greatly appreciated!

adz
Thimbles
DD-WRT Novice


Joined: 28 Aug 2013
Posts: 9

PostPosted: Wed Aug 28, 2013 3:24    Post subject: Well that sucks. Reply with quote
I just got a used e1000 and upgraded the firmware to FW_E1000_2.1.02.006_US_20130015.bin successfully.

I set the computer IP to 192.168.1.8, hooked the cable into lan 3, disconnected the wan, did a hard reset, and tried to flash:

dd-wrt.v24-21061_NEWD-2_K2.6_mini_e1000v2.bin

which says, in the router database, "E1000 v2 Firmware - Webflash image for first installation"

Whoops. I got to 98% complete according to the stock firmware upgrade utility when it hung. So I waited. The message came up that it failed. So I waited. I set my iphone timer to give the router 5 minutes, then I pinged it.

Nothing. So I did a reset. Nothing. No route to host and host is down errors. I've done a couple of hard resets. Nothing but a blinking power button.

I'm bricked. I was using Chrome on Mac OSX. Anyone else run into this? Guess I should have used the dd-wrt.v24-16758_NEWD-2_K2.6_mini_e1000v2.bin.

Oh well, live and learn. Might want to clean up that router database. I really thought I had checked all my steps.
Thimbles
DD-WRT Novice


Joined: 28 Aug 2013
Posts: 9

PostPosted: Wed Aug 28, 2013 13:43    Post subject: Reply with quote
So after further investigation, on boot all the lights go on as normal, the lan and wireless stay down, the power light keeps blinking like it's locked in boot, and all the Ethernet ports light up when a cable is inserted.

Does this indicate I need to go in with a serial and not a jtag? Ps, anyone have any idea how I screwed up?
Thimbles
DD-WRT Novice


Joined: 28 Aug 2013
Posts: 9

PostPosted: Wed Aug 28, 2013 13:48    Post subject: Reply with quote
Thimbles wrote:
and all the Ethernet ports light up when a cable is inserted.


And by this, I mean I insert a cable into the wan and the wan light turns blue. I insert the cable into port 1 and the port 1 light turns on. Pings to 192.168.1.1 are dead.

I hate linguistic ambiguity.
puspakkb
DD-WRT Novice


Joined: 28 Jun 2011
Posts: 2

PostPosted: Thu Nov 07, 2013 15:22    Post subject: Wifi speed drop issue with E1000 new firmware Reply with quote
Hi,
Initially i was using "dd-wrt.v24-16758_NEWD-2_K2.6_mini_e1000v2.bin" for last 2 years. It was great. No issues at all. Yesterday i saw an updated firmware in the firmware data base and I flashed my E1000v2 with this firmware "dd-wrt.v24-21061_NEWD-2_K2.6_mini_e1000v2.bin".

I flash it successfully and it was working fine. But when i connect to the VPN (IPSEC), i found that the wireless speed drops down drastically and does not work at all. But when disconnect the VPN, it worked fine. I tried many settings and it did not work.

Finally i have to downgrade to the previous firmware which i was using. When i flashed back the previous firmware, i found everything is working fine again (wifi speed with vpn).

I want to upgrade to the latest firmware, but due to this issue, i am willing to do it now.

Any help on this would be appreciated.

Thanks
markiansaclot
DD-WRT Novice


Joined: 20 Feb 2012
Posts: 5

PostPosted: Sat Jan 04, 2014 12:18    Post subject: MAC Priority is not working in QoS Reply with quote
After i Updated my firmware its not working now... even i choose my mac address to excempt
tushar
DD-WRT Novice


Joined: 29 Aug 2012
Posts: 12

PostPosted: Mon Jan 13, 2014 19:32    Post subject: High ping 17ms router IP Reply with quote
Just upgraded my Linksys Router E1000 V2.1 to dd-dd-wrt.v24-21061_NEWD-2_K2.6_mini everything works fine when i ping Router IP 192.168.1.1 response is 17ms something wrong going developer need help.


Pinging 192.168.1.1 with 32 bytes of data:
Reply from 192.168.1.1: bytes=32 time=17ms TTL=64
Reply from 192.168.1.1: bytes=32 time=17ms TTL=64
Reply from 192.168.1.1: bytes=32 time=17ms TTL=64
Reply from 192.168.1.1: bytes=32 time=17ms TTL=64

Ping statistics for 192.168.1.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 17ms, Maximum = 17ms, Average = 17ms
tushar
DD-WRT Novice


Joined: 29 Aug 2012
Posts: 12

PostPosted: Tue Jan 14, 2014 8:42    Post subject: High ping 17ms router IP Reply with quote
DD-WRT i need help ugently kindly let me know how solve this bug. Crying or Very sad Crying or Very sad
juliushibert
DD-WRT Novice


Joined: 18 Jul 2010
Posts: 44

PostPosted: Tue Feb 04, 2014 23:53    Post subject: Reply with quote
I've spent some time trying to workout which might be the best version of the DD-WRT firmware for my E1000v2 router.

I've had the router for about 6 months and it's all working fine. It's running DD-WRT v24-sp2 (05/03/11) mini - build 16968M NEWD-2 K2.6 Eko which is obviously different from the suggested build number in the DD-WRT Wiki and the suggested build of K26 build 16758 in the first post of this forum.

After spending some time reading the Peacock thread, I've come to the conclusion that as the E1000v2 is classed as a new (post 2011) router, that the Peacock suggested STABLE build would be the 17790 or 18000. Is that are fair assumption.

Basically the router has been running fine for the past 6 months, however I have noticed recently that on my current build (16968M) some features like QoS just don't seem to work or don't work as intended. So I'm trying to find a stable firmware that I can now solidly rely on.

_________________
Buffalo WZR-HP-AG300H: DD-WRT v3.0-r32170 std (06/01/17)
Goto page Previous  1, 2, 3, 4, 5, 6, 7, 8  Next Display posts from previous:    Page 7 of 8
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum