[neonhomer]

I figured out what I was doing wrong with why it would't TFTP. (I wasn't adding the last 0 to the address on the one address).

Anyway, following the tutorial, and using 0201, I flashed the Fonera. Everything went as it should until I came to the reset command. The router just sat there, and did nothing. I left it sit for about 20 min, and it still did nothing...

So I unplugged it, and plugged it back in, and went into Telnet. It showed me the "Loading script in xx seconds" and then just sat there. I let it sit for another 10-20 mins, and it still did nothing.

So I unplugged it again, and now it's bricked. The power light comes on, and the Internet light just flashes. I have tried to Telnet back into it @ 192.168.1.254:9000 and I get "Could not open connection to host, on port 9000". SSH does nothing as well....

I have tried to hold the reset button in for up to 2 min, and nothing happens.

So it's bricked... right? Now what to do?

[neonhomer]

Okay... I can get it to SSH, but not Telnet........

[totalanni]

if you got ssh...why would you need telnet?

[neonhomer]

I have the 0201 firmware, and I wanted to install the 0215 firmware... but when I go through the process to load the firmware, it doesn't change...... it stays 0201....

I am not brave enough to try the build in firmware updater....