Fonera + firmware dated 3-10-2007:: WPA problem

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware
Author Message
nullboy
DD-WRT Novice


Joined: 12 Mar 2007
Posts: 2

PostPosted: Mon Mar 12, 2007 18:24    Post subject: Fonera + firmware dated 3-10-2007:: WPA problem Reply with quote
Is anyone else running into this: I enable WPA-PSK (personal TKIP), set the keys and even reboot the router. The router shows that WPA is enabled but I can still connect to the AP without entering any keys. Windows XP's "wireless networks" tool shows the supposed to be protected SSID as unsecured while the router shows WPA is enabled. Previous fw dates did not have this same problem for me. I also reflashed a few different times, erased nvram, and also did the reset switch procedure with no effect.

Anyone else?

Thanks!
Sponsor
digerati
DD-WRT User


Joined: 28 Feb 2007
Posts: 57

PostPosted: Mon Mar 12, 2007 18:30    Post subject: Reply with quote
I can confirm that on 3/7/07 too.


I have a fonera and have it flashed with version:
Firmware: DD-WRT v24 Beta (03/07/07) std
and I enabled wpa2 personal with tkip+aes and it doesnt work.

I can connect right up to it without entering any passphrase.
It doesnt even prompt.
linsook
DD-WRT Novice


Joined: 22 Feb 2007
Posts: 8

PostPosted: Mon Mar 12, 2007 18:40    Post subject: Reply with quote
this may sound dumb, but try pushing save twice.
digerati
DD-WRT User


Joined: 28 Feb 2007
Posts: 57

PostPosted: Mon Mar 12, 2007 19:07    Post subject: Reply with quote
Confirmation:

Clicked save twice, waited, rebooted, still not working in version 03/07/07
joksi
DD-WRT Guru


Joined: 16 Jan 2007
Posts: 1238

PostPosted: Mon Mar 12, 2007 19:09    Post subject: Reply with quote
Try 0310?
nullboy
DD-WRT Novice


Joined: 12 Mar 2007
Posts: 2

PostPosted: Mon Mar 12, 2007 19:51    Post subject: save twice FW version dated 3-10-2007 Reply with quote
for version 3-10-2007, hitting save twice had no effect. Router still shows WPA is enabled but clients can connect without keys and Windows reports the AP as unsecured.
digerati
DD-WRT User


Joined: 28 Feb 2007
Posts: 57

PostPosted: Mon Mar 12, 2007 20:03    Post subject: Reply with quote
I agree with nullboy.

I upgraded to :
Firmware: DD-WRT v24 Beta (03/10/07) std
Time: 15:00:39 up 13 min, load average: 0.46, 0.29, 0.16

And still have the same issue, no WPA.
Skywave
DD-WRT Novice


Joined: 17 Jun 2006
Posts: 44

PostPosted: Mon Mar 12, 2007 20:09    Post subject: Reply with quote
Ah that seems to be the problem. My fonera can only connect WPA to my WPA2 AP and not WPA2
joksi
DD-WRT Guru


Joined: 16 Jan 2007
Posts: 1238

PostPosted: Mon Mar 12, 2007 20:29    Post subject: Reply with quote
Thats right, I have the same problem on 0310, the WPA secured AP reported by Windows and DD-WRT to be unsecured and open Confused
vacaloca
DD-WRT Novice


Joined: 17 Sep 2006
Posts: 15

PostPosted: Tue Mar 13, 2007 17:35    Post subject: Reply with quote
Is this fixed in 3-13 beta? It worked fine for me in 3-10, but I have it set to WPA2 w/ compatibility for WPA
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum