RedBoot> fconfig -l
Run script at boot: true
Boot script:
.. fis load -l vmlinux.bin.l7
.. exec
Boot script timeout (1000ms resolution): 10
Use BOOTP for network configuration: false
Gateway IP address: 0.0.0.0
Local IP address: 192.168.1.254
Local IP address mask: 255.255.255.0
Default server IP address: 0.0.0.0
Console baud rate: 9600
GDB connection port: 9000
Force console for special debug messages: false
Network debug at boot time: false
This is what I get
Your server IP address is 0.0.0.0
You won’t be able to TFTP with that address (none) set for the server.
Re-enter the
”ip_address -l [local ip address/24] -h [remote server address]”
command making sure that the “remote server” address is set to whatever address you assigned the PC running TFTP.
Thank you for the reply.
I can TFTP and HTTP to it. That print screen was before I did ip_address -l [local ip address/24] -h [remote server address]- Let me explain better wat's going on:
I did the tutorial explained in Wiki. Everything went fine, not a single error- But after the last reboot, the router wouldn't respond to anything. It should be on 192.168.1.1 but nothing here. I've tried every other possible conficuration and access but with no luck. It starts, then the Internet led keeps bleeping in random order. THe power led is steady on. The only way to contact the router is by telnet on the port 9000 with the IP 192.168.1.254 (redboot). I can access to it in any time, not just in the first 10 seconds. I guess (as stated here in this thread) that it can't go through the boot procedure and hangs. If I had the tools to make a serial cable, I could check were it hangs and what error returns.
I've tried to do the procedure from scratch with dd-wrt firmware and FON's official firmware but with no luck.
Thank you once again for your time reading this post
I agree that you should start over but if I were you, I would download a different (earlier) version of the vmlinux.bin.l7 & root.fs files just to make sure the ones you have aren’t buggy or corrupt.
Hello everybody. Nice tutorial. I keep getting a timeout error when I try to insert this command on putty "load -r -v -b 0x80041000 vmlinux.bin.l7" Any clues?Thanks in advance
Hi all! Right after enabling the SSH on my fonera and when I'm inside the router I'm not able to wget from my http server. As it is working I tryed to ping my pc from router and it won't ping... My pc pings the router... What could it be the reason? Thanks in advance