[free6]

Thanks digerati

I have just flashed my fonera to DD-WRT without any problems. Perhaps you should submit your guide to the wiki as well?

[digerati]

How do I do that? The only thing I know about Wiki's is how to read em.

[Ubu]

[digerati]

Have you tried to start completely over?

[c0v3n4n7]

Thank you for the reply.
I can TFTP and HTTP to it. That print screen was before I did ip_address -l [local ip address/24] -h [remote server address]- Let me explain better wat's going on:
I did the tutorial explained in Wiki. Everything went fine, not a single error- But after the last reboot, the router wouldn't respond to anything. It should be on 192.168.1.1 but nothing here. I've tried every other possible conficuration and access but with no luck. It starts, then the Internet led keeps bleeping in random order. THe power led is steady on. The only way to contact the router is by telnet on the port 9000 with the IP 192.168.1.254 (redboot). I can access to it in any time, not just in the first 10 seconds. I guess (as stated here in this thread) that it can't go through the boot procedure and hangs. If I had the tools to make a serial cable, I could check were it hangs and what error returns.
I've tried to do the procedure from scratch with dd-wrt firmware and FON's official firmware but with no luck.
Thank you once again for your time reading this post

[digerati]

Well if at all possible I would try to start over with the fis init commands, essentially reflashing it.

[Ubu]

I agree that you should start over but if I were you, I would download a different (earlier) version of the vmlinux.bin.l7 & root.fs files just to make sure the ones you have aren’t buggy or corrupt.

[arthurson]

thx lots, today i just follow the video to make my fonera change successfully.

[c0v3n4n7]

Thank you for the reply guys.
Can I start over from the very beginning using only redboot?

[c0v3n4n7]

Thank you all for the help. I managed to install a build from February and it's now working great.
Cheers

[clubfreak]

Hello everybody. Nice tutorial. I keep getting a timeout error when I try to insert this command on putty "load -r -v -b 0x80041000 vmlinux.bin.l7" Any clues?Thanks in advance

[zelv]

Hi all! Right after enabling the SSH on my fonera and when I'm inside the router I'm not able to wget from my http server. As it is working I tryed to ping my pc from router and it won't ping... My pc pings the router... What could it be the reason? Thanks in advance

[zbarnes]

If you are having trouble with the wget command, you may want to follow this guide instead:

http://uselesshacks.com/?p=23

It cuts out most of the problems people are having with wget.

[zelv]

[zbarnes]

Is there any way you could open up your networks property page, and the http file server, take a screenshot and post it here?

Because it sound like there is probably a tiny setting out of place, and I might be able to see it if you can do that.