Posted: Fri Apr 15, 2011 22:32 Post subject: need help with 2 routers
i just recently flashed DD-WRT onto my WRT150N v1.1
v24-sp2 (08/07/10)std - build 14896
the whole point was to use this wireless N router for all of my hardware
(i stream movies and play games)
while a WRT54G linksys wireless G router would be used for my dad and step mom
they dont do that much besides check email
however when i put my WRT150N before the WRT54G everything hit the fan
now the G doesnt get the internet, and its still running the native firmware btw
right now my N router is on AP mode with a mixed network and the TX Power is at 71mW
i have already a cat 5 cable from the N router switch to the G router switch
and i have reset the G also
although i havent tried a 30/30/30 on the G yet
any suggestions
or a course of action
would be greatly appreciated
thanks
Joined: 26 Jul 2009 Posts: 126 Location: Coral Springs, FL
Posted: Fri Apr 15, 2011 22:38 Post subject:
Switch the WRT54G from gateway to router mode, disable the DHCP server and disable the firewall. Also change the wireless channel and be sure the SSIDs are different. _________________ My Network:
SB6120 modem
E3000 running DD-WRT v24-sp2 (03/10/11) mega
(SVN revision 16403M NEWD-2 K2.6 Eko) (in N-only mode on both bands)
8-port Gigabit switch
Aluratek airmm01f configured as 802.11g AP
WRT54G v6 running dd-wrt micro sp2, set up as repeater and bridge for Sony TV (connected to the 802.11g AP)
