Need help choosing the latest stable recommended firmware

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Author Message
MikeLee
DD-WRT Novice


Joined: 27 Dec 2018
Posts: 2

PostPosted: Thu Dec 27, 2018 22:40    Post subject: Need help choosing the latest stable recommended firmware Reply with quote
Need help choosing the latest stable recommended firmware for my Linksys E4200 v1 router with KRACK fixed.
The advertised speed from my internet provider is 3mbps down and 0.384kbps up.
Thank You in advance.
Sponsor
Dr_K
DD-WRT User


Joined: 23 Mar 2018
Posts: 445

PostPosted: Thu Dec 27, 2018 23:30    Post subject: Re: Need help choosing the latest stable recommended firmwar Reply with quote
MikeLee wrote:
Need help choosing the latest stable recommended firmware for my Linksys E4200 v1 router with KRACK fixed.


Asking a question like that here is like starting a fight in a crowd....

Bear in mind that I do not have that particular router to test....but....

DD-WRT v3.0-r35531 from (03/26/18 ) has stuck and run stable on every router I've throne it at......more or less.....well more more or less than many other builds

FYI all this KRACK CRAP only has any merit if you are using your router as a client to something else.....and then someone needs to be within range with the ambition and know how to try to pentest your client

_________________
Location 1
R7800- DD-WRT v3.0-r53562 (10/03/23) Gateway
WNDR3400v1 DD-WRT v3.0-r35531_mega-nv64k (03/26/18 ) Access Point
WRT160Nv3 DD-WRT ?v3?.0-r35531 mini (03/26/18 ) Access Point
WRT54GSv5 DD-WRT v24-r33555_micro_generic (10/20/17) Repeater
Location 2
R7800- DD-WRT v3.0-r51855 (02/25/23) Gateway
R6300v2- DD-WRT v3.0-r50671 (10-26-22) Access Point
WNDR3700v2 DD-WRT v3.0-r35531 std (03/26/18 ) Access Point
E1200 v2 DD-WRT v3.0-r35531 mega-nv64k (03/26/18 ) Gateway(for trivial reasons)
RBWAPG-5HACT2HND-BE RouterOS-v6.46.4 (2/21/20) Outdoor Access Point
2x RBSXTG-5HPACD RouterOS-v6.46.4 (2/21/20) PTP Bridge 866.6Mbps-1GbpsLAN
Location 3
2x R7000- DD-WRT v3.0-r50671 (10/26/22) Access Points
2x RBWAPG-60AD RouterOS-v6.45.9 (04/30/20) PTP Bridge 2.3Gbps-1GbpsLAN
2x RBSXTsqG-5acD RouterOS-v6.49.7 (10/14/22) PTP Bridge 866.6Mbps-1GbpsLAN

Thank You BrainSlayer for ALL that you do & have done, also to "most" everyone here that shares their knowledge
MikeLee
DD-WRT Novice


Joined: 27 Dec 2018
Posts: 2

PostPosted: Fri Dec 28, 2018 0:08    Post subject: Re: Need help choosing the latest stable recommended firmwar Reply with quote
Dr_K wrote:
MikeLee wrote:
Need help choosing the latest stable recommended firmware for my Linksys E4200 v1 router with KRACK fixed.


Asking a question like that here is like starting a fight in a crowd....

Bear in mind that I do not have that particular router to test....but....

DD-WRT v3.0-r35531 from (03/26/18 ) has stuck and run stable on every router I've throne it at......more or less.....well more more or less than many other builds

FYI all this KRACK CRAP only has any merit if you are using your router as a client to something else.....and then someone needs to be within range with the ambition and know how to try to pentest your client


Thanks for the info and advise Dr_K. Now I know to thread with caution.
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum