Linksys E1000 v2.1

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Goto page Previous  1, 2, 3, 4 ... 14, 15, 16  Next
Author Message
Killarny
DD-WRT Novice


Joined: 12 May 2011
Posts: 3

PostPosted: Thu May 12, 2011 1:39    Post subject: port forwarding doesn't work Reply with quote
I flashed the file that Eko posted back on page 2, and for the most part, it seems to work well. However, port forwarding does not appear to work at all, and even the DMZ doesn't function. Has anyone else had issues with this?
Sponsor
phuzi0n
DD-WRT Guru


Joined: 10 Oct 2006
Posts: 10143

PostPosted: Thu May 12, 2011 2:05    Post subject: Re: port forwarding doesn't work Reply with quote
Killarny wrote:
I flashed the file that Eko posted back on page 2, and for the most part, it seems to work well. However, port forwarding does not appear to work at all, and even the DMZ doesn't function. Has anyone else had issues with this?

http://www.dd-wrt.com/wiki/index.php/Port_Forwarding_Troubleshooting

_________________
Read the forum announcements thoroughly! Be cautious if you're inexperienced.
Available for paid consulting. (Don't PM about complicated setups otherwise)
Looking for bricks and spare routers to expand my collection. (not interested in G spec models)
instaxshops
DD-WRT Novice


Joined: 14 May 2011
Posts: 1

PostPosted: Sat May 14, 2011 18:39    Post subject: Reply with quote
hi guys..

i'm very newbie here..

but, i want to ask several questions..

i have linksys E1000 V2.1 that i just bought.

i want to try dd-wrt.

but, any tutorial what step to dd wrt ?

this is my first time.. so , i'm worried that i already read many things on dd wrt , if it's failed could brick my router.. Sad

thanks for answer my questions..
Silly Wabbit
DD-WRT Novice


Joined: 17 Mar 2011
Posts: 17

PostPosted: Mon May 16, 2011 2:21    Post subject: Reply with quote
What happened to the specific steps to flash the E1000 on the Supported Device page?

Please let me know if these steps will suffice...

1. Hard reset (30/30/30) and wire connect to PC
2. Log into web GUI and and choose factory default
3. Browse the correct FM and upload
4. Wait about 5minutes to let FM install
5. Hard reset again

Mucho thanks!
Silly Wabbit
DD-WRT Novice


Joined: 17 Mar 2011
Posts: 17

PostPosted: Mon May 16, 2011 2:37    Post subject: Reply with quote
Forgot to ask if I have to make my computer IP be static because I was instructed to do so when I was flashing the DIR-601
metrowalker
DD-WRT Novice


Joined: 08 May 2011
Posts: 35

PostPosted: Mon May 16, 2011 16:35    Post subject: Reply with quote
I read the instructions here:

http://www.dd-wrt.com/phpBB2/viewtopic.php?t=51486

With that reading and prep out of the way I then did the following.

Connect e1000 to laptop via ethernet cable (laptop is set to obtain ip address automatically). Login to Linksys firmware to confirm it is up and running.

To install dd-wrt -

Step 1: 30/30/30 reset

Step 2: log into router and do the mini flash via the web gui. I used-

ftp://dd-wrt.com/others/eko/BrainSlayer-V24-preSP2/2011/05-08-11-r16994/broadcom_K26/dd-wrt.v24-16994_NEWD-2_K2.6_mini_e1000v2.bin

EDIT: FOR INITIAL FLASHING OF THE V2.1, THE FILE ON PAGE 2 OF THIS THREAD SHOULD BE USED.

Step 3: waited about 10 mins (I was busy doing other stuff)

Step 4: 30/30/30 reset

Step 5: log into router and do the standard flash via the web gui. I used-

ftp://dd-wrt.com/others/eko/BrainSlayer-V24-preSP2/2011/05-08-11-r16994/broadcom_K26/dd-wrt.v24-16994_NEWD-2_K2.6_std_nokaid_small.bin

Step 6: waited about 5 mins

Step 7: log into router to confirm it was up and running

Step 8: 30/30/30 reset

Step 9: log into router and configure for use
cgr
DD-WRT Novice


Joined: 28 Feb 2011
Posts: 20

PostPosted: Mon May 16, 2011 23:32    Post subject: Reply with quote
I flashed dd-wrt.v24-16964_NEWD-2_K2.6_mini_e1000v2-testfor21.bin last night and dd-wrt is now running on my e1000v2.1. On this version, the wifi led does not light up.

I am a bit confused about the file dd-wrt.v24-16968_NEWD-2_K2.6_mini_e1000v2.bin (which eko posted as the official build for v2.1 - is it just a typo that the filename doesnt specifically state v2.1?), as well as kerzenanzuender's previous post which links to the 'testfor21.bin' named file (the same one I am using) in response to noknok's post about downloading a .bin file and it not working (which I presume is the e1000v2.bin file.

Sorry about the confusion, just want to assist other people who may be in the same boat as myself, and which file to download. Thankyou so much to eko for the compile, I've been waiting for ages to get dd-wrt on my e1000.

As a final note, these are the steps I took:
- Downloaded testfor21.bin file
- 30-30-30 reset on e1000
- Hardcoded 192.168.1.101 ip address to pc
- Connected to http://192.168.1.1 (e1000 default ip address) via internet explorer
- Went to admin -> upgrade firmware. Browsed to testfor21.bin file and clicked upgrade.
- Waited ~10 minutes just to be sure
- Reconnected to http://192.168.1.1 and got dd-wrt password change page
- Did 30-30-30 reset
- Reconnected to http://192.168.1.1 and set the username/password, then proceeded to configure the device as normal.
mripguru
DD-WRT Novice


Joined: 20 May 2011
Posts: 2

PostPosted: Fri May 20, 2011 10:32    Post subject: VPN version? Reply with quote
Hi Guys,

Is there a VPN version of the v2.1 firmware to install? It doesn't appear that the one that is offered in this thread supports VPN (mini).

Any help would be appreciated (I may have already bricked 1 E1000 trying this Sad ).
phuzi0n
DD-WRT Guru


Joined: 10 Oct 2006
Posts: 10143

PostPosted: Fri May 20, 2011 17:46    Post subject: Re: VPN version? Reply with quote
mripguru wrote:
Hi Guys,

Is there a VPN version of the v2.1 firmware to install? It doesn't appear that the one that is offered in this thread supports VPN (mini).

Any help would be appreciated (I may have already bricked 1 E1000 trying this Sad ).

After you've done the initial flash, flash it again with a k2.6 openvpn small build from one of the latest revisions on the ftp server like 17084. See the peacock thread about space limitations and use any generic k2.6 build that will fit onto a 4MB model.

ftp://dd-wrt.com/others/eko/V24-K26/svn17084/

_________________
Read the forum announcements thoroughly! Be cautious if you're inexperienced.
Available for paid consulting. (Don't PM about complicated setups otherwise)
Looking for bricks and spare routers to expand my collection. (not interested in G spec models)
mripguru
DD-WRT Novice


Joined: 20 May 2011
Posts: 2

PostPosted: Fri May 20, 2011 19:37    Post subject: Re: VPN version? Reply with quote
You mean ftp://dd-wrt.com/others/eko/V24-K26/svn17084/dd-wrt.v24-17084_NEWD-2_K2.6_openvpn_small.bin?

phuzi0n wrote:
mripguru wrote:
Hi Guys,

Is there a VPN version of the v2.1 firmware to install? It doesn't appear that the one that is offered in this thread supports VPN (mini).

Any help would be appreciated (I may have already bricked 1 E1000 trying this Sad ).

After you've done the initial flash, flash it again with a k2.6 openvpn small build from one of the latest revisions on the ftp server like 17084. See the peacock thread about space limitations and use any generic k2.6 build that will fit onto a 4MB model.

ftp://dd-wrt.com/others/eko/V24-K26/svn17084/
Silly Wabbit
DD-WRT Novice


Joined: 17 Mar 2011
Posts: 17

PostPosted: Sun May 22, 2011 3:51    Post subject: Reply with quote
cgr wrote:
I flashed dd-wrt.v24-16964_NEWD-2_K2.6_mini_e1000v2-testfor21.bin last night and dd-wrt is now running on my e1000v2.1. On this version, the wifi led does not light up.

I am a bit confused about the file dd-wrt.v24-16968_NEWD-2_K2.6_mini_e1000v2.bin (which eko posted as the official build for v2.1 - is it just a typo that the filename doesnt specifically state v2.1?), as well as kerzenanzuender's previous post which links to the 'testfor21.bin' named file (the same one I am using) in response to noknok's post about downloading a .bin file and it not working (which I presume is the e1000v2.bin file.

Sorry about the confusion, just want to assist other people who may be in the same boat as myself, and which file to download. Thankyou so much to eko for the compile, I've been waiting for ages to get dd-wrt on my e1000.

As a final note, these are the steps I took:
- Downloaded testfor21.bin file
- 30-30-30 reset on e1000
- Hardcoded 192.168.1.101 ip address to pc
- Connected to http://192.168.1.1 (e1000 default ip address) via internet explorer
- Went to admin -> upgrade firmware. Browsed to testfor21.bin file and clicked upgrade.
- Waited ~10 minutes just to be sure
- Reconnected to http://192.168.1.1 and got dd-wrt password change page
- Did 30-30-30 reset
- Reconnected to http://192.168.1.1 and set the username/password, then proceeded to configure the device as normal.


I RE-flashed my v2.1 with 16968 and it is working perfectly with the wifi led on. Dont worry about the typo of the bin being v2. As long as you get the same bin from p2 (which is where I got mine) then you'll be fine. Try flashing to 16968.
NotoriousOIT
DD-WRT Novice


Joined: 26 May 2011
Posts: 2

PostPosted: Thu May 26, 2011 7:17    Post subject: Reply with quote
I followed all the steps and got my E1000 V2.1 set up as a repeater and it works great, except every week or so it loses its settings and I have to reset and enter everything again. Did I do something wrong, or are other people having this problem too?

Thanx!
bballs2
DD-WRT Novice


Joined: 02 Jun 2011
Posts: 2

PostPosted: Thu Jun 02, 2011 1:36    Post subject: How do you revert back to original firmware? Reply with quote
Hi everyone, want to make sure I dont brick my router as I might be returning it to att because they suck. Do I use the firmware update tab in administration or the backup tab as it also allows you to load a .bin file?

Thanks for the help.
curan
DD-WRT Novice


Joined: 04 Jun 2011
Posts: 2

PostPosted: Sat Jun 04, 2011 14:09    Post subject: Reply with quote
Hi,

I'm a little bit confused, so to get a couple of things straight:

Metrowalker used one method of flashing and silly wabbit used another. After flashing with Eko's FW from page 2, should i reflash with another FW afterwards or stay with the page 2 FW?

I'm also asking this question because i read before i flashed, that with the E2000/E3000 models you should only use the trailed FW.

If i'm misunderstanding anything, please let me know.
HockeyFan4Life
DD-WRT User


Joined: 03 Jan 2008
Posts: 230

PostPosted: Sun Jun 05, 2011 1:14    Post subject: Reply with quote
I bought a 2.1 and everything seems to be working ok on it. I was able to see the wireless network.
_________________

Routers:
E2000 latest BIG
whr-g54s client vpn
wr850g lastest mini
Goto page Previous  1, 2, 3, 4 ... 14, 15, 16  Next Display posts from previous:    Page 3 of 16
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum