The firmware I installed was BN750DB_3.4.3.9-091_qos.trx
My problem is that the SSID changed from Belkin.bxx and Belkin.bxx.5Ghz to ASUS and ASUS_5G, respectively. It also changed the wireless network access password, so I cannot get into the network. Could someone be so kind as to help me gain access back to my network?
So I have BN750DB_3.4.3.9-091_dlna.trx. I've gotten it set up as a repeater / AP client (Wireless > bridge > AP Mode), but one thing I can't find is MAC spoofing for WIFI interfaces. Anyone know how to do this?
Transmission is a unix gnu project which can be included in router fw. uTorrent is a windows application.
Anyway router cpu is too weak for non-router functions.
интериорни врати
Last edited by grisina on Wed Mar 04, 2015 14:16; edited 1 time in total
Posted: Sun Mar 01, 2015 21:53 Post subject: F9K1109 support status?
I was wondering if there will ever be any support for the F9K1109v1 router. I've seen that a lot of people have the F9K1103 but no one really talks about the F9K1109.
Does any one know if there ever will be any support for the 09? Thanks.
The firmware I installed was BN750DB_3.4.3.9-091_qos.trx
My problem is that the SSID changed from Belkin.bxx and Belkin.bxx.5Ghz to ASUS and ASUS_5G, respectively. It also changed the wireless network access password, so I cannot get into the network. Could someone be so kind as to help me gain access back to my network?
Thanks.
I gave it a try myself. admin/admin
I appreciate your help, but I meant I don't know the network security key that will allow me to connect to the network, since the SSID was changed to ASUS[_5G].
It's not the same as before the flash with the custom firmware.
NOTE:
After upgrade to 3.X.3.8-085 (and higher) from any previous builds, please:
- Clear browser cache to properly render WebUI pages.
- Sync OpenVPN client and server settings with new controls.
- Update region timezone (for Russia only).
- Remember that the manual NVRAM reset is not required.
After manual NVRAM reset:
- Both Wireless AP security is WPA2-Personal with pre-shared key 1234567890 by default.
- HTTP and Telnet/SSH login:passw is admin:admin by default.
Posted: Thu Mar 12, 2015 18:32 Post subject: Re: QoS
helpmeplsn65u wrote:
I've upgraded my firmware to the .091_qos, but I have no idea how to setup the QoS, could someone help me please?
There's no GUI based QoS manager in this firmware. You have to run QoS as a script. There's a script generator program that makes script writing easier. WRT54 Script Generator is the one I think most people use.