Kong mod repo

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2  Next
Author Message
drhoolec
DD-WRT Novice


Joined: 06 Jun 2011
Posts: 5

PostPosted: Mon Jun 06, 2011 19:09    Post subject: Kong mod repo Reply with quote
Hi there guys !
I've been following the threads here for a long time (since i bought my old wrt54g v8.2) but never needed to register (always found answers for all my questions just by reading... thank you all for that!)... until today.

Well, for 3 days now i've been trying to get my hands on build 16830M from Kong, since the update to 17140 broke my samba shares (even when using opt samba!). I've found that, as Kong keeps the same link for his mod, so that it always point to the newest version, and apparently there is no repo, once a new version is released, the old one is "kind of lost"... and we can turn out in trouble if something goes not as well as expected and there is no old version to revert back to (if you did not renamed the old version before dowloading the new, as i should have done!)!

That said, I ask if there is someone here which uses Kong mod which happens to have saved build 16830-(minidlna version) and are willing to send me a copy?

Also, isn't there a user of kong's mod with means to hold a repo with at least the three last builds? I see now i should have kept copies!

Thanks a lot everybody... specially BS, Eko and many other gurus around here...


Last edited by drhoolec on Mon Jun 06, 2011 20:00; edited 1 time in total
Sponsor
kt_haddock
DD-WRT Guru


Joined: 25 Dec 2009
Posts: 625

PostPosted: Mon Jun 06, 2011 19:40    Post subject: Reply with quote
your welcome: 16830-dlna


dd-wrt-usb-ftp-samba3-dlna-O2-v24-K26-broadcom.bin
 Description:

Download
 Filename:  dd-wrt-usb-ftp-samba3-dlna-O2-v24-K26-broadcom.bin
 Filesize:  6.58 MB
 Downloaded:  620 Time(s)


_________________
[I prefer answere in whole sentence]
drhoolec
DD-WRT Novice


Joined: 06 Jun 2011
Posts: 5

PostPosted: Mon Jun 06, 2011 19:47    Post subject: Reply with quote
Thanks a lot kt_haddock !

I'll revert my 610nv2 later tonight to this build and re-config my samba shares!
Ozzy_PT
DD-WRT Novice


Joined: 30 Oct 2010
Posts: 15

PostPosted: Mon Jun 06, 2011 19:53    Post subject: Reply with quote
These latest builds, 17xxx, are really crappy, many samba and wireless problems.
Dark_Shadow
DD-WRT Guru


Joined: 31 Aug 2009
Posts: 2430
Location: Third Rock from the Sun

PostPosted: Mon Jun 06, 2011 21:51    Post subject: Re: Kong mod repo Reply with quote
drhoolec wrote:
Also, isn't there a user of kong's mod with means to hold a repo with at least the three last builds?


My 4shared files.

_________________
Peacock Thread-FAQ -- Firmware Recommendations -- dd-wrt Wiki

Testing Multiple Routers -- Bootloader Collection Project -- My Wiki
amires
DD-WRT Novice


Joined: 05 Aug 2010
Posts: 36

PostPosted: Tue Jun 07, 2011 8:34    Post subject: Reply with quote
Thank you for this. So in your opinions build 16830 is more stable than 17140?
wabe
DD-WRT User


Joined: 17 Jun 2006
Posts: 385

PostPosted: Tue Jun 07, 2011 9:49    Post subject: Reply with quote
The latest Kong build 17XXX (forgot the exact number) works extremely well on ASUS RT-N16. No issues with Samba 3.5, wireless etc. Highly recommended! I use the "frater-build" which enables USB-support by default.
<Kong>
DD-WRT Guru


Joined: 15 Dec 2010
Posts: 2019
Location: Germany

PostPosted: Tue Jun 07, 2011 10:05    Post subject: Reply with quote
My current 17140 build has a few minor problems:

-nmbd not included (you have to use \\routerip\share to connect, instead of \\routername\share)
-wiviz not working
-wireless signal decreases over time (reboot fixes it)

I have to test a few things tonight if they work out well, the above probs should be fixed.

By the way, all my current builds have the usb change for frater included(usb enabled by default)

_________________
Development Units I use for Development:
R7000/R6300V2/R6300

Kong K3 AC DD-WRT Builds for Mipsel R6300/WNDR4500/D1800H/AC66U/EA6500V1
Kong K3 AC DD-WRT Builds for ARM 1450AC/R6250/R6300v2/R7000/AC56U/AC68U/DIR-868
Kong DD-WRT Guides
wabe
DD-WRT User


Joined: 17 Jun 2006
Posts: 385

PostPosted: Tue Jun 07, 2011 10:41    Post subject: Reply with quote
<Kong> wrote:
My current 17140 build has a few minor problems:

-nmbd not included (you have to use \\routerip\share to connect, instead of \\routername\share)
-wiviz not working
-wireless signal decreases over time (reboot fixes it)


I run Samba from Optware and haven't noticed that problem.

Since I automatically reboot every week I haven't noticed the problem with wireless signal either.

Don't use Wiviz so no issue

Great build! Thank you Kong! Of course any improvements are highly appreciated.
wabe
DD-WRT User


Joined: 17 Jun 2006
Posts: 385

PostPosted: Tue Jun 07, 2011 17:24    Post subject: Reply with quote
<Kong> wrote:

I have to test a few things tonight if they work out well, the above probs should be fixed.


Could you report back if you are successful?
<Kong>
DD-WRT Guru


Joined: 15 Dec 2010
Posts: 2019
Location: Germany

PostPosted: Tue Jun 07, 2011 20:47    Post subject: Reply with quote
OK guys, I'm done with testing. I uploaded new builds, see:

http://www.myopenrouter.com/forum/thread/28422/Kong-Mod-build-17140-Update-08.06.11-14-00-CET/


So in order to make this another great build I'll stay on that revision for a while adding only fixes.

_________________
Development Units I use for Development:
R7000/R6300V2/R6300

Kong K3 AC DD-WRT Builds for Mipsel R6300/WNDR4500/D1800H/AC66U/EA6500V1
Kong K3 AC DD-WRT Builds for ARM 1450AC/R6250/R6300v2/R7000/AC56U/AC68U/DIR-868
Kong DD-WRT Guides


Last edited by <Kong> on Wed Jun 08, 2011 12:19; edited 1 time in total
desiromeo
DD-WRT User


Joined: 24 Oct 2008
Posts: 212
Location: Suburbs

PostPosted: Wed Jun 08, 2011 3:16    Post subject: Reply with quote
Hey Kong i was wondering if it was possible you can make a firmware with Samba 3/ Mini DLNA/ openvpn all in one?? Can this not be done like tomatousb?

If you could do this i would switch over in a heartbeat...i just dont want to give up one or the other as i use both...

_________________
ASUS RT-AC68U [Kong build 24850] = main router
Linksys E2000 [Build 15962M NEWD-2 K2.6 big] = client bridge
<Kong>
DD-WRT Guru


Joined: 15 Dec 2010
Posts: 2019
Location: Germany

PostPosted: Wed Jun 08, 2011 5:29    Post subject: Reply with quote
This would be possible if I remove other features. Just too bad these routers only have 8MB flash.
_________________
Development Units I use for Development:
R7000/R6300V2/R6300

Kong K3 AC DD-WRT Builds for Mipsel R6300/WNDR4500/D1800H/AC66U/EA6500V1
Kong K3 AC DD-WRT Builds for ARM 1450AC/R6250/R6300v2/R7000/AC56U/AC68U/DIR-868
Kong DD-WRT Guides
amires
DD-WRT Novice


Joined: 05 Aug 2010
Posts: 36

PostPosted: Wed Jun 08, 2011 6:52    Post subject: Reply with quote
Hi Kong,

Thank you for all the efforts. As desiromeo requested it would be nice to have an all-in-in firmware. Since RT-N16 have 32MB flash do you think it is possible to make a special firmware for these routers? Also is it possible for you to include e2fsprogs and swap-utils in the image. Everytime I need to reformat my drive I have to flash to tomato to be able to reformat my drive and create swap partitions. Thanks again.
zoomlink
DD-WRT User


Joined: 08 May 2011
Posts: 221

PostPosted: Thu Jun 09, 2011 3:04    Post subject: RT-N16/Latest Kong Mod - Only 95% of Memory Available 4 use Reply with quote
Does anyone know why my RT-N16 shows only 95% of the memory available? See attached.


RT-N16-Memory.PNG
 Description:
 Filesize:  16.52 KB
 Viewed:  9217 Time(s)

RT-N16-Memory.PNG


Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum