Posted: Wed Jul 27, 2022 5:41 Post subject: New Build - 07/27/2022 - r49567
Welcome to Atheros r49567 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: stracetcpdumpwireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) and applicable configurations to reproduce.
Netgear Nighthawk X10 R9000
Firmware Version DD-WRT v3.0-r49567 std (07/27/22)
Kernel Version Linux 4.9.324 #639 SMP Tue Jul 26 01:11:40 +07 2022 armv7l
Current Time Not Available
Uptime 2 min
GUI over 49544
Reset: no
Issues: none
Joined: 03 Nov 2015 Posts: 317 Location: Florida, USA
Posted: Wed Jul 27, 2022 13:36 Post subject:
Router: Linksys ea8500 ..WDS AP
Firmware: DD-WRT v3.0-r49567 std (07/27/22)
Kernel: Linux 4.9.324 #1083 SMP Tue Jul 26 14:31:55 +07 2022 armv7l
Reset: NO ...Upgrade from r49492
Errors: NONE
Router: Linksys ea8500 ..WDS Station
Firmware: DD-WRT v3.0-r49567 std (07/27/22)
Kernel: Linux 4.9.324 #1083 SMP Tue Jul 26 14:31:55 +07 2022 armv7l
Reset: NO ...Upgrade from r49492
Errors: NONE
Router: TP Link WR1043ND Ver.2 WDS Station
"older build"
The last 4 -5 builds been working really well for me. Thanks to the Devs and everyone that make this happen ! _________________ ......All GOOD here... Just Handshakes and Time Stamps !......
Joined: 16 Mar 2019 Posts: 353 Location: Szczecin, Poland EU
Posted: Wed Jul 27, 2022 19:21 Post subject: New Build - 07/27/2022 - r49567
Router: Tp-Link TL-WDR3600 v. 1.5
Kernel: Linux 3.10.108-d11 #112980 Wed Jul 27 04:30:42 +07 2022 mips
Reset: No
Mode: Internet gateway, WIFI 5GHz AP, dnsmasq server, iptables firewall
Status: Working satisfactorily
Issues: Currently none
Uptime: more than 4h
Currently router stay on the newest version of DD-WRT. Since many builds I'm not make factory reset. Actually I can use full speed of internet connection and I'm glad of this device. My speedtests have ~630mbit/s download and ~90 mbit/s in upload. That's very good values. I'm attach reports in zip file to solve possibly bugs and errors.
Router Model: TP-Link TL-WR1043ND
Firmware Version: DD-WRT v3.0-r49567 std (07/27/22)
Previous: DD-WRT v3.0-r49544 std (07/22/22)
File: tl-wr1043nd-webflash.bin
Kernel Version: Linux 3.10.108-d11 #113008 Wed Jul 27 05:14:20 +07 2022 mips
Mode: Gateway/AP
Reset: None required
Status: OK
Uptime: ~24h
Issues/Errors: None at present.
Will continue testing functionality of features and report back should any issues arise. _________________ "The woods are lovely, dark and deep,
But I have promises to keep,
And miles to go before I sleep,
And miles to go before I sleep." - Robert Frost
"I am one of the noticeable ones - notice me" - Dale Frances McKenzie Bozzio
1. My NTFS 5TB HDD shows up as 18TB and it says 8TB free of 18TB total
This issue has been ongoing since I guess 4 months already, but I was always in hope with the next build it will be fixed.
2. My HDD does not show up on Android Devices or TV's. The Samba won't appear. On PC it is visible
3. my NTFS hard disk (5tb) casually (after restart of router) won't be visible anymore, rather a different partition appears (15mb)
4. My old Xbox One can not connect to WIFI, that only appears to my WIFI, if I connect to other WIFI or to my hotspot no issues at all. My hotspot has same SSID and PSW and it connects immediately. Probably, this is rather an Xbox issue than dd-wrt, but worth to mention.
1. My NTFS 5TB HDD shows up as 18TB and it says 8TB free of 18TB total
This issue has been ongoing since I guess 4 months already, but I was always in hope with the next build it will be fixed.
2. My HDD does not show up on Android Devices or TV's. The Samba won't appear. On PC it is visible
3. my NTFS hard disk (5tb) casually (after restart of router) won't be visible anymore, rather a different partition appears (15mb)
4. My old Xbox One can not connect to WIFI, that only appears to my WIFI, if I connect to other WIFI or to my hotspot no issues at all. My hotspot has same SSID and PSW and it connects immediately. Probably, this is rather an Xbox issue than dd-wrt, but worth to mention.
4. My old Xbox One can not connect to WIFI, that only appears to my WIFI, if I connect to other WIFI or to my hotspot no issues at all. My hotspot has same SSID and PSW and it connects immediately. Probably, this is rather an Xbox issue than dd-wrt, but worth to mention.
Old hardware needs old wireless security settings, but anyway recommend use wired Ethernet for gaming.