FLASH:S29AL016M(SPANSION) not supported in EJTAG.

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Author Message
woyoubenben
DD-WRT Novice


Joined: 29 Apr 2008
Posts: 7

PostPosted: Sun Oct 26, 2008 10:52    Post subject: FLASH:S29AL016M(SPANSION) not supported in EJTAG. Reply with quote
My English is terrible.

BELKIN 7231-4 need EJTAG,but FLASH:S29AL016M(SPANSION) not supported in EJTAG.

I get this result :



C:\TJTAGV2>tjtagv2 -probeonly /noemw

==========================================
EJTAG Debrick Utility v2.1.4-Tornado-MOD
==========================================

Probing bus ... Done

Instruction Length set to 8

CPU Chip ID: 00000101001101010010000101111111 (0535217F)
*** Found a Broadcom BCM5352 Rev 1 CPU chip ***

- EJTAG IMPCODE ....... : 00000000100000000000100100000100 (00800904)
- EJTAG Version ....... : 1 or 2.0
- EJTAG DMA Support ... : Yes
- EJTAG Implementation flags: R4k MIPS32

Issuing Processor / Peripheral Reset ... Done
Enabling Memory Writes ... Skipped
Halting Processor ... <Processor did NOT enter Debug Mode!> ... Done
Clearing Watchdog ... Done
Probing Flash at (Flash Window: 0x1fc00000) ... Done

*** Unknown or NO Flash Chip Detected ***

*** REQUESTED OPERATION IS COMPLETE ***


How can I do with it??
Sponsor
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum