abogangster DD-WRT Novice
Joined: 02 Mar 2012 Posts: 9
|
Posted: Fri Mar 02, 2012 4:11 Post subject: Possible solution |
|
Hi
For my wr841nd v7.2 firmwares from r17967 to r18024, don't work if using client mode, always get a wan ip = 0.0.0.0
However firmware r17201 is working ok as client (not client bridge), the only thing that aint working is the DDNS.
To get client mode working, reset your router, flash it with version r17201, wait for it to reset one more time, login and define user and password, go to the status tab, wireless, and do a site survey, select the desired AP, click join, the page will change to the basic wireless settings, the SSID will be changed accordingly, select client mode, press save (not apply settings), go to wireless security, select the appropiate security mode and enter WEP or WPA key, click save, go to basic router settings and select DHCP automatic configuration (sometimes it's disabled), save and reboot router.
I haven't tried client bridge mode with this build, only wireless client mode. |
|