thanx to vpritiskovicconnecticus & Reiter (from openwrt forum)
after reading yours posts i'm successfully upgrade firmware on my DWL-2100AP A4 to OpenWRT
but some trouble i have and wiki needs to be updated to correct procedure of flashing DWL2100. _________________ OpenWRT backfire 10.03.1-rc5 @ D-link DWL-2100AP A4
I wrote a detailed step-by-step guide on installing OpenWRT on d-link dwl2100-ap rev a4 router using serial, you may download it at http://rghost.net/22014711
MOD: deleted the stupid instruction which bricks routers! _________________ OpenWRT backfire 10.03.1-rc5 @ D-link DWL-2100AP A4
i still have problems getting my kristech kt-link running with urjtag. i checked out the current urjtag tree (i think) and it builds sucessfull but i doesnt have kt-link support. following the porter of the kt-link the patch should be already in the current tree. if someone has some hints.... _________________ Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
Joined: 28 Aug 2009 Posts: 248 Location: Dalmatia, Croatia
Posted: Sat Oct 29, 2011 19:17 Post subject:
@Sash
Ok, redboot can be done later...
Can you please provide a generic atheros build, either (kernel + rootfs) or combined one that fit into (4MB-custom redboot) for test?
I'm trying to change the original soft of 2100,with the manual of n-di "Installing_OpenWRT_on_D-link_dwl-2100ap_a4.pdf" in the manual say:
5) Load RedBoot to RAM:
type in boot prompt:
[Boot]: $ae(1,0)hai:redboot220.img h=192.168.1.175 e=192.168.1.1:0xffffff00 f=0x80
Attached TCP/IP interface to ae1.
Attaching network interface lo0... done.
Loading... 279808
Starting at 0x80010000...
+
RedBoot startup
FLASH configuration checksum error or invalid key
Can't get BOOTP info, using default IP address
Ethernet eth1: MAC address 00:1c:f0:89:79:82
IP: 192.168.1.1, Default server: 0.0.0.0
RedBoot(tm) bootstrap and debug environment [RAM]
Non-certified release, version v2_0 - built 17:10:53, Nov 22 2009
With changes made by Artur Korobov <elgenius@yandex.ru>
Copyright (C) 2000, 2001, 2002, Red Hat, Inc.
RAM: 0x80010000-0x80800000, 0x80054500-0x807e1000 available
FLASH: 0xbe000000 - 0xbe3e0000, 62 blocks of 0x00010000 bytes each.
RedBoot>
6) Write RedBoot to ROM:
Warning! The next command will format your router's flash so you will not be able to boot the original firmware anymore.
RedBoot> fis init -f
About to initialize [format] FLASH image system - continue (y/n)? y
*** Initialize FLASH Image System
RedBoot> fis list
Name FLASH addr Mem addr Length Entry point
RedBoot 0xBE000000 0xBE000000 0x00050000 0x00000000
RedBoot config 0xBE3C0000 0xBE3C0000 0x00001000 0x00000000
FIS directory 0xBE3D0000 0xBE3D0000 0x00010000 0x00000000
RedBoot> ip_address -l 192.168.1.1 -h 192.168.1.175
RedBoot> load -r -b 0x80041000 redboot220.bin
Specified address (0x80041000) is not believed to be in RAM - continue (y/n)? y
Raw file loaded 0x80041000-0x800413ff, assumed entry at 0x80041000
RedBoot> reset
I do everything well, the Puty answers is equal to the manual, when I get to send the command "reset", it gives the error, in the my last post.
Thanks for your answers
May you try to do "5)" and "6)" again and copy&paste output from console to see what happened?
While doing my device i have same error but doing something trouble is go on ) _________________ OpenWRT backfire 10.03.1-rc5 @ D-link DWL-2100AP A4
Joined: 28 Aug 2009 Posts: 248 Location: Dalmatia, Croatia
Posted: Thu Nov 24, 2011 9:52 Post subject:
This was wrong:
afm wrote:
RedBoot> load -r -b 0x80041000 redboot220.bin
Specified address (0x80041000) is not believed to be in RAM - continue (y/n)? y
Raw file loaded 0x80041000-0x800413ff, assumed entry at 0x80041000
RedBoot> reset
