I need to create that folders, or I can put this code in another place?
Hi.
See at my post and dllud too:
arssant wrote:
But worked with openwrt backfire 10.03.1.
With dd-wrt got issue, as Buss error when running wget. I tried all packages from openwrt ( kamikase, backfire, even adjustment )
dllud wrote:
Based upon them I was able to create scripts to auto login in FON in Portugal. They were tested in OpenWRT using the wget package with SSL. wget-nossl or the small wget in BusyBox lack some required options.
So only tested and confirmed by myself with openwrt, not dd-wrt.
I tryed with dd-wrt with no success.
If i understand, you are used a fonera+(Fon2201) with OpenWRT backfire 10.03.1, package "wget-nossl" installed and cliente mode configured to connect a fon_zon_free_internet (interface wireless name "wwan"), me too.
For auto login I edit the Zon script, that the dllud insert in topic, with my user and password (for example ..post-data="USERNAME=XYZ@gmail.com&PASSWORD=passXYZ&remember=on" $POST_URL..), saved with name "99-login-zon" and copy for etc/hotplug.d/iface/
However the auto login dont work!
I need install the package "wget" or other? I only install "wget-nossl".
May be related to the network signal strength I get?
If i understand, you are used a fonera+(Fon2201) with OpenWRT backfire 10.03.1, package "wget-nossl"
I need install the package "wget" or other? I only install "wget-nossl".
May be related to the network signal strength I get?
PS: Tb sou tuga :-p
Hi.
Right. Do NOT use wget-nossl ( remove it ) or better, do factory default and reinstall all 3 ipk ( wget zlib libopenssl ) from scratch, but with correct wget ( wget_1.13.4-1_atheros.ipk , this is for atheros based processor ( aka fonera ))
About signal, from 15-20% quality, it start working nicely.
Joined: 27 Jun 2013 Posts: 34 Location: Besancon France
Posted: Fri Dec 26, 2014 16:33 Post subject: wget ssl ?
I'm afraid NO WAY
that's the reason I'm using curl
look at my post realted to hotspot reconnexion. _________________ -WRT54GS
Firmware: DD-WRT v24-sp2 (10/10/09) mini
-WRT54GL v1.1
Firmware: DD-WRT v24-sp2 (01/16/10) std-nokaid
- WRT54G v3.1
Firmware: DD-WRT v24-sp2 (08/12/10) std-nokaid
It's necessary to enter and login in the router by SSH (examle: putty)
+ install these packages using opkg?
+ save script as "99-login-zon" in etc/hotplug.d/iface/ folder? (How to create this file?)
Please give me some help about all putty commands that I need to use. Best Regards,
P.A
Note: now I'm using TP-Link Archer C7 v2 because in the WR841ND I haven't enough space to install all packages...
Best Regards,
Pedro
PORTUGUESE NOTE:
Nota: DASS.. nem os tugas me ajudam?
Hi gandamaluko,
did you got it to work with the new NOS FON on the last OpenWRT (without the hotplug.d)?
I'm trying to setup this solution with a TP-Link WR710N and there is only an OpenWRT version without hotplug.d for it.
I would like to build a firmware with all the packages and scripts already included... could it be possible?