Joined: 13 Aug 2013 Posts: 6867 Location: Romerike, Norway
Posted: Thu Jun 28, 2018 21:39 Post subject:
That's because the interface goes to the switch. You have to look at the individual ports. On Atheros, you can list them with swconfig. Don't know any possibility with Broadcom.
Posted: Thu Jun 28, 2018 22:12 Post subject: Re: Can you view or modify auto-negotiate port settings?
MuzzleVelocity wrote:
Is there a way to force a port to 100 Mbps? (Instead of gig).
You can set it from the Setup->VLANs page I believe. I recalling finding the CLI commands for it years ago (different issue), which didn't work, then later realized it didn't work cuz the VLANs page sets them. At least from what I've read; I haven't done it. _________________ #NAT/SFE/CTF: limited speed w/ DD#Repeater issues#DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo#
OPNsense x64 5050e ITX|DD: DIR-810L, 2*EA6900@1GHz, R6300v1, RT-N66U@663, WNDR4000@533, E1500@353,
WRT54G{Lv1.1,Sv6}@250|FreshTomato: F7D8302@532|OpenWRT: F9K1119v1, RT-ACRH13, R6220, WNDR3700v4