Hi there, i got an error with gpio 7 led and sesbutton script to unmount and killall services.
Does anyone got these erros too?
Are you referring to the led_gpio.c I posted above ? If so what is the error message ? I have the modified the sesbutton script to use WPS button. It was a quick and dirty edit, not something I'll be proud to post here, but it works. Let me know if you need it.
The problem with the asus rt-n13u B1 firmware is that eko compiled it with "std" version =\. It should be compiled with "mega"
Please Eko, compile it with mega!!!
Thanks
+1 From what I've been finding out in the general forums, this might be why I can't mount my mac formatted drives. I'd sure <3 a mega compile (maybe with a working inadyn?)
The problem with the asus rt-n13u B1 firmware is that eko compiled it with "std" version =\. It should be compiled with "mega"
Please Eko, compile it with mega!!!
Thanks
+1 From what I've been finding out in the general forums, this might be why I can't mount my mac formatted drives. I'd sure <3 a mega compile (maybe with a working inadyn?)
From now, i would like it just to be compiled with mega. Fixing inadyn will take some time. =D
Hi there, i got an error with gpio 7 led and sesbutton script to unmount and killall services.
Does anyone got these erros too?
Are you referring to the led_gpio.c I posted above ? If so what is the error message ? I have the modified the sesbutton script to use WPS button. It was a quick and dirty edit, not something I'll be proud to post here, but it works. Let me know if you need it.
Hi rlg, I mean that I run gpio disable 7 to be led 7 on, using firmware 17201 and when press wps button its start a sesbutton script, with this third fw when I execute gpio disable 7 its on and after became off, wps button not start..
I don´t know how to use your script. thanks to replyed
You need to configure ddns from the webgui or add -u username -p password of your ddns account to the startup script command. The inadyns binary looks up the username and password in nvram
Do i need to put the router in recovery mode to flash or just simple tftp ?
I never tried tftp but used the asus firmware restoration utility which requires you to put your router in recovery mode.
This post is somewhat old, but I think it's useful to point a few details.
I don't have any computers with Windows, so I had no choice but use tftp. This is simple:
1. Put the router in recovery mode;
2. Set your computer IP address to 192.168.1.15 <-- this is an important step;
3. Just upload the new firmware (remember to set it to binary).
Doing a hard reset after that is probably a good idea. Hope this helps.
Also, I can't be thankful enough for the mod. It is great. Thanks.
A few questions for you awesome dd-wrt users! I'm trying to turn my Asus router into a $20 Airport Extreme. So:
Is optware what I need if I want to install netatalk?
What instructions should I follow if I want to install opware?
How do I install FS drivers for apple format drives?
Loving this firmware so far. So much better than the original stuff.