Your reports for Broadcom units are greatly appreciated !
Router:
Firmware:
Kernel:
Status:
Reset:
Errors:
This build thread is for reporting successes and problem with loading this experimental test build. This is important info for developers and users. Always state your hardware and SPECIFIC build (e.g. 29387_NEWD-2_K2.6_mega-nv64k.bin). Do not ask questions about your specific router or how to configure it in this thread; create your own thread to discuss any specific problems you have or need resolved. Please also do not respond to such questions. This thread is to report info, not to seek it. Posts that do not add to understanding this build will be deleted. Make sure you know how to flash properly and the risk before using this build. It is important to adhere to these requirements, to keep this thread from becoming impossibly long and useless. If you don't know what build to flash and how to flash properly and have a means of recovery if things should go wrong, do NOT flash this experimental test build.
Last edited by GreyDoc on Mon Apr 04, 2016 4:50; edited 1 time in total
Router: Netgear R7000
Firmware: DD-WRT v3.0-r29387 std (03/31/16)
Kernel: Linux 4.4.6 #549 SMP Thu Mar 31 08:59:03 CEST 2016 armv7l
Status: Working
Reset: No
Previous: 29362
Errors: No
Temperatures :
CPU 49.1 °C / WL0 41.2 °C / WL1 42.6 °C
Memory :
Total Available 97% 255332 kB / 262144 kB
Free 73% 187304 kB / 255332 kB
Last edited by Bernadoe on Sun Apr 03, 2016 7:30; edited 9 times in total
Router: TrendNet TEW-811DRU
Firmware: r29387
Kernel: Linux 4.4.6 #552 Thu Mar 31 09:14:56 CEST 2016 armv7l
Status: Working as expected*
Reset: flashed via webui, reset to default
Errors: Not yet
*nvram usage improved, cpu runs cooler since 29346
Router: Linksys E1700 / N300
Firmware: r29387
Kernel: Linux 3.10.101 #1817 Thu Mar 31 12:42:27 CEST 2016 mips2016 armv7l
Status: Working
Reset: reset to default
Errors: still observing
Posted: Fri Apr 01, 2016 13:14 Post subject: WAN PORT not working
Router ModelAsus RT-AC5300
Firmware Version DD-WRT v3.0-r29387 (03/31/16)
Kernel VersionLinux 4.4.6 #554 SMP Thu Mar 31 09:22:02 CEST 2016 armv7l
Status: WAN PORT ( not working )
Reset: yes
Errors: no
Router: Linksys ea6400 (AKA ea6300 v1)
Firmware: DD-WRT v3.0-r29387 std (03/31/16)
Kernel: Linux 4.4.6 #549 SMP Thu Mar 31 08:59:03 CEST 2016 armv7l
Status: Working No issues
Reset: No
Errors: None after 12 hours
Router: Linksys E4200 V1
Firmware: dd-wrt.v24-29387_NEWD-2_K3.x_mega-e4200.bin
Kernel: 3.10.101
Reset: no.
Errors: no.
Note: no USB device attached, I don't use it as DHCP or DNS server.
Router: Linksys E3000 (formerly WRT610N V2)
Firmware: dd-wrt.v24-29387_NEWD-2_K3.x_mega-e3000.bin
Kernel: 3.10.101
Reset: no
Errors: no.
Note: I don't use it as DHCP or DNS server. _________________ 2 times APU2 Opnsense 21.1 with Sensei
2 times RT-AC56U running DD-WRT 45493 (one as Gateway, the other as AP, both bridged with LAN cable)
3 times Asus RT-N16 shelved
E4200 V1 running freshtomato 2020.8 (bridged with LAN cable)
3 times Linksys WRT610N V2 converted to E3000 and 1 original E3000 running freshtomato 2020.8 (bridged with LAN cable)
Router: TP-Link Archer C9 v1
Firmware: R29387
Kernel: 3.10.101
Status: Working, same as prev betas
Reset: No
Errors: Same as prev betas, cannot get virtual-interface on wireless devices to work. Everything else fine.
update: very stable, no resets/loss of connection.
Wireless stats after 24hrs.
Received (RX)1621933 OK, no error
Transmitted (TX)2539690 OK, 85 errors
Last edited by nulldaemon on Mon Apr 04, 2016 7:37; edited 1 time in total
Router: e2500
Firmware: DD-WRT v3.0-r29387
Kernel: Linux version 3.10.101 (root@nmndev) (gcc version 5.1.0 (OpenWrt GCC 5.1.0 r45933) ) #12099 Thu Mar 31 13:06:29 CEST 2016
Status: Working
Reset: None
Errors: CPU overclocking still not setting correctly
Joined: 29 Oct 2009 Posts: 40 Location: Bucharest, Romania, HELL
Posted: Sat Apr 02, 2016 9:31 Post subject:
Router: Linksys EA2700
Firmware: DD-WRT v3.0-r29387 giga (03/31/16)
Kernel: Linux 3.10.101 #12087
Status: Working
Reset: Flashed from stock and then reset
Errors: None so far
My usage is somewhat light, though: PPPoE, DHCP, DDNS, VPN, some manual port forwards and also uPnP activated. _________________ I reject your reality and substitute my own.
Router: ASUS RT-AC87U ( Broadcom BCM4709 2cores @1GHz)
Firmware: DD-WRT v3.0-r29387 std (03/31/16)
Kernel: Linux 4.4.6 #556 SMP Mar 31 09:28:18 armv7
Status: working with no issues
Reset: No
Errors: None after 24 hours
Temperatures:
CPU 71.9 °C / WL0 41.2 °C / WL1 65.0 °C / WL2 39.9 °C
Memory:
Total Available: 97% 255332 kB of 262144 kB
Free: 81% 205648 kB of 255332 kB
Wireless:
wl0 (ng-mixed-Client/wpa2-aes)
Packet Stats:
Received (RX) - 100% 3786783 OK, 7 errors
Transmitted (TX) - 100% 3396778 OK, no error
Router: Linksys WRT 1900AC (Marvel Armada 370/XP 2cores @1.2Ghz)
Firmware: DD-WRT v3.0-r29387 std (03/31/16)
Kernel: Linux 3.18.29 #69 SMP Thu Mar 31 03:40:25 CEST 2016 armv7
Status: working with no issues
Reset: No
Errors: None after 24 hours
Temperatures:
CPU 63.1 °C / WL0 48.0 °C / WL1 50.0 °C
Memory:
Total Available - 97% 254620 kB / 262144 kB
Free - 84% 214068 kB / 254620 kB
Joined: 13 Aug 2013 Posts: 6868 Location: Romerike, Norway
Posted: Sat Apr 02, 2016 14:12 Post subject:
Router: Asus rt-ac66u
Firmware: DD-WRT v3.0-r29387 std (03/31/16)
Kernel: Linux 3.10.101 #12083 Thu Mar 31 12:53:23 CEST 2016 mips
Status: working
Reset: No
Errors: None after 24 hours
Router: Asus RT-AC66U
Firmware: DD-WRT v3.0-r29387 giga (03/31/16)
Kernel: Linux 3.10.101 #12083 Thu Mar 31 12:53:23 CEST 2016 mips
Status: mixed-AP/wpa2-aes (wl0),mixed-AP/wpa2-aes (wl1) QoS,uPnP,ssh,syslog working with no issues
Reset: No
Errors: None after 1 hours
Temperatures:
WL0 44.0 °C / WL1 45.1 °C
Memory:
Total Available - 91% 239284 kB of 262144 kB
Free - 83% 199120 kB of 239284 kB
Wireless Packet Stats:
wl0:(~24hrs with 3 clients)
Received (RX) - 100% 22168 OK, no error
Transmitted (TX) - 100% 112944 OK, 10 errors
wl1:(~24hrs with 2 clients)
Received (RX) - 100% 415000 OK, no error
Transmitted (TX) - 100% 640262 OK, 165 errors _________________ Location (urban) - 1x Linksys EA8500 (AP wlan0 & wlan1 enabled)
1x Asus 68u (Repeater Bridge w/VAP) - wl0 disabled
1x Asus 87u (Client Bridge) - wl1 disabled
Latest and greatest builds
Last edited by stephensuley on Sun Apr 03, 2016 16:56; edited 1 time in total
