[cletus8]

Hi! im new in the forum, but i have been using DD-WRT for a while, and its great!

I currently have 2 VLANs set up in my router (WRT160N V3, with Firmware: DD-WRT v24-sp2 (04/11/11) mini)
I have 2 vlans created, to make the QoS easyer to apply.
Ports 1,2,4 are directly connected to hosts.
Port 3 is connected to a switch.


Vlan 1 192.168.1.1 /24 -- Ports 1,2,4
Vlan 2 192.168.2.1 /24 -- Port 3

What i want to do is to interconnect those 2 vlans / route between those vlans.
Or, in other words, I want to be able to share the resources of vlan1 with vlan2 and backwards.

I know that when you set up vlans on the router, they are in fact connected, and the IPtables commands are to isolate them, not to connect them.

So, i think its a subnet problem ??
For example, if I do a ping to 192.168.1.1 (gateway) from 192.168.2.100, i receive replys.
But, if i ping 192.168.1.108 (a host) from 192.168.2.100, i receive no replys.


Any suggestion?

[phuzi0n]

See the very bottom.

http://www.dd-wrt.com/wiki/index.php/Linking_Subnets_with_Static_Routes#Wrapping_Up