EOC-5611 :FAIL:

Post new topic   Reply to topic    DD-WRT Forum Index -> Senao Devices
Author Message
snig64
DD-WRT Novice


Joined: 20 Aug 2011
Posts: 8

PostPosted: Fri Jan 06, 2012 6:54    Post subject: EOC-5611 :FAIL: Reply with quote
Hello all. I cannot get my 5611 to load. I have tried a couple different ways, used the 12533 version, tried fs init -f as suggested by sash in another post.

I also tried some information from http://www.dd-wrt.com/wiki/index.php/D-Link_DIR-300_rev_A to no avail.

I get to the end and do reset, but it never comes back up. I give it five minutes each time, then power it down, and wait another five minutes.

Code:

== Executing boot script in 1.990 seconds - enter ^C to abort
^C
RedBoot> ip_address -l 192.168.1.1 -h 192.168.1.11
IP: 192.168.1.1/255.255.255.0, Gateway: 192.168.21.1
Default server: 192.168.1.11
RedBoot> fis init
About to initialize [format] FLASH image system - continue (y/n)? y
*** Initialize FLASH Image System
... Erase from 0xbe7e0000-0xbe7f0000: .
... Program from 0x81fe0400-0x81ff0400 at 0xbe7e0000: .
RedBoot> load -r -b 0x80041000 linux.bin

In this set from the EOC-5610 linux.bin download, it does absolutely nothing. The next paste is with the 12533 version.

Code:


^C== Executing boot script in 0.320 seconds - enter ^C to abort
^C
RedBoot> ip_address -l 192.168.1.1 -h 192.168.1.11
^C
RedBoot> IP: 192.168.1.1/255.255.255.0, Gateway: 192.168.21.1
Default server: 192.168.1.11
RedBoot> fis init
About to initialize [format] FLASH image system - continue (y/n)? y
*** Initialize FLASH Image System
... Erase from 0xbe7e0000-0xbe7f0000: .
... Program from 0x81fe0400-0x81ff0400 at 0xbe7e0000: .
RedBoot> load -r -b 0x80041000 linux2.bin
Using default protocol (TFTP)
Raw file loaded 0x80041000-0x8054afff, assumed entry at 0x80041000
RedBoot> fis create linux
... Erase from 0xbe030000-0xbe53a000: .................................................................................
... Program from 0x80041000-0x8054b000 at 0xbe030000: .................................................................................
... Erase from 0xbe7e0000-0xbe7f0000: .
... Program from 0x81fe0400-0x81ff0400 at 0xbe7e0000: .
RedBoot> fconfig boot_script true
boot_script: Setting to true
RedBoot> fconfig boot_script_timeout 4
boot_script_timeout: Setting to 4
Update RedBoot non-volatile configuration - continue (y/n)? y
... Erase from 0xbe7e0000-0xbe7f0000: .
... Program from 0x81fe0400-0x81ff0400 at 0xbe7e0000: .
RedBoot> fconfig
Run script at boot: true
Boot script:
.. fis load -l linux
.. exec
Enter script, terminate with empty line
>> fis load -l linux
>> exec
>>
Boot script timeout (1000ms resolution): 4
Use BOOTP for network configuration: false
Gateway IP address: 192.168.21.1
Local IP address: 192.168.1.1
Local IP address mask: 255.255.255.0
Default server IP address:
Console baud rate: 9600
GDB connection port: 9000
Force console for special debug messages: false
Network debug at boot time: false
Update RedBoot non-volatile configuration - continue (y/n)? y
... Erase from 0xbe7e0000-0xbe7f0000: .
... Program from 0x81fe0400-0x81ff0400 at 0xbe7e0000: .
RedBoot> reset


Can't say I haven't tried and read other topics...

Code:

RedBoot> fis load -l linux
Image loaded from 0x80041000-0x802d4a2c
RedBoot> exec


still fails to go into working mode...
Sponsor
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17619
Location: Hesse/Germany

PostPosted: Fri Jan 06, 2012 8:54    Post subject: Reply with quote
try the latest beta
_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
snig64
DD-WRT Novice


Joined: 20 Aug 2011
Posts: 8

PostPosted: Sat Jan 07, 2012 7:14    Post subject: Reply with quote
Latest beta booted. Thanks.
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Senao Devices All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum