Downgrade D-Link DIR-600

Post new topic   Reply to topic    DD-WRT Forum Index -> Ralink SoC based Hardware
Author Message
Nikolasr
DD-WRT Novice


Joined: 24 Oct 2011
Posts: 16

PostPosted: Mon Oct 24, 2011 14:30    Post subject: Downgrade D-Link DIR-600 Reply with quote
Hello, i have installed latest firmware of d-link dir-600 and now i need to back on dd-wrt tried via "emergency room interface" but says incorrect image

Please help.Is urgent
Sponsor
LOM
DD-WRT Guru


Joined: 28 Dec 2008
Posts: 7647

PostPosted: Mon Oct 24, 2011 16:41    Post subject: Re: Downgrade D-Link DIR-600 Reply with quote
Nikolasr wrote:
Hello, i have installed latest firmware of d-link dir-600 and now i need to back on dd-wrt tried via "emergency room interface" but says incorrect image

Please help.Is urgent


So urgent that you had to cross post in a thread for the B5 model?
Sorry, we don't handle urgencies and emergencies here.

_________________
Kernel panic: Aiee, killing interrupt handler!
Nikolasr
DD-WRT Novice


Joined: 24 Oct 2011
Posts: 16

PostPosted: Mon Oct 24, 2011 16:45    Post subject: Reply with quote
Im sorry for that.

Firmware Version:2.11 Tue 16 Aug 2011

This is firmware version but dlink gives me firwmare that is working for all versions
Nikolasr
DD-WRT Novice


Joined: 24 Oct 2011
Posts: 16

PostPosted: Mon Oct 24, 2011 17:22    Post subject: Reply with quote
Dlink tells me to download this firmware
ftp://ftp.dlink.es/dir/DIR-600/Firmware/DIR-600_fw_revBX_2.11b11_ALL_en_110824.zip

I downloaded and upgraded, now cannot use dd-wrt bin. Can you tell me what to do.
Nikolasr
DD-WRT Novice


Joined: 24 Oct 2011
Posts: 16

PostPosted: Tue Oct 25, 2011 21:08    Post subject: Reply with quote
Okay lets explain for those who are reading the theard for first time
Im having DIR-600 B2 / 2.03 router which was upgraded to latest firmware, i getted some problems for leds, and dlink developered some new version, and my problem gets fixed.But when i tried now to flash dd-wrt says invalid image.After couple of time i found solution for other firmware.Read carefully.Response at your own risk.

Okay, got it to fix myself
Steps are following :
1.Download this firmware :
ftp://ftp.dlink.co.uk/dir_products/dir-600/firmware/DIR-600_B5_FW210WWB06.zip

2.Install via Emergency Room Web Interface (http://dd-wrt.com/wiki/index.php/D-Link_DIR-600_/_300vB#Alternate_Install_Method_using_Emergency_Room_Web_Interface) NOTE THIS : When its upgrading unplug the power cable and then plug it again.

3.Configure manually your ip address 192.168.0.2
subnet mask : 255.255.255.0
and access http://192.168.0.1

4.Upload ddwrt factory .bin

5.When boots up in dd-wrt power off and boot it again in emergency room, and upload firmware (this time this one : ftp://ftp.dlink.cz/dir/dir-600/driver_software/DIR-600_fw_revB_2-03B04_all_en_20100601.zip)

6.After upgrade to standard version, you can flash to dd-wrt without any problems (http://dd-wrt.com/wiki/index.php/D-Link_DIR-600_/_300vB#Installation_Instructions)

Enjoy!
Nikolasr
DD-WRT Novice


Joined: 24 Oct 2011
Posts: 16

PostPosted: Wed Oct 26, 2011 10:52    Post subject: Reply with quote
Now im getting power led and internet led to be orange

Any fix for this, i search in forum but didnt found.
lamukra
DD-WRT Novice


Joined: 03 May 2013
Posts: 7

PostPosted: Fri May 03, 2013 14:53    Post subject: Reply with quote
Nikolasr wrote:
Okay lets explain for those who are reading the theard for first time
Im having DIR-600 B2 / 2.03 router which was upgraded to latest firmware, i getted some problems for leds, and dlink developered some new version, and my problem gets fixed.But when i tried now to flash dd-wrt says invalid image.After couple of time i found solution for other firmware.Read carefully.Response at your own risk.

Okay, got it to fix myself
Steps are following :
1.Download this firmware :
ftp://ftp.dlink.co.uk/dir_products/dir-600/firmware/DIR-600_B5_FW210WWB06.zip

2.Install via Emergency Room Web Interface (http://dd-wrt.com/wiki/index.php/D-Link_DIR-600_/_300vB#Alternate_Install_Method_using_Emergency_Room_Web_Interface) NOTE THIS : When its upgrading unplug the power cable and then plug it again.

3.Configure manually your ip address 192.168.0.2
subnet mask : 255.255.255.0
and access http://192.168.0.1

4.Upload ddwrt factory .bin

5.When boots up in dd-wrt power off and boot it again in emergency room, and upload firmware (this time this one : ftp://ftp.dlink.cz/dir/dir-600/driver_software/DIR-600_fw_revB_2-03B04_all_en_20100601.zip)

6.After upgrade to standard version, you can flash to dd-wrt without any problems (http://dd-wrt.com/wiki/index.php/D-Link_DIR-600_/_300vB#Installation_Instructions)

Enjoy!


I confirm that this fix works for me

I have Dir-600 H/W Ver. B2 F/W Ver. 2.02

Some time ago update it and got different number in web interface: Hardware Revision - Bx Firmware - 2.15

Was not able to install dd-wrt with this setup

But quoted fix helped me with that - dd-wrt is now installed and working

Note: In step 5 five used this link - same firmware different link: ftp://ftp.dlink.cz/dir/dir-600/driver_software/DIR-600_fw_revB1B2_2-03B04_all_en_20100601.zip

Thank you very much
evandrotex
DD-WRT Novice


Joined: 22 Dec 2014
Posts: 1

PostPosted: Mon Dec 22, 2014 21:41    Post subject: Reply with quote
Just to add some notes.

It happens exactly what was told here. HW = B2 but after dlink´s firmware upgrade could not install dd-wrt.

Follow the tips, but it was not working and could find the files anymore.

So what I did was use a old version of firefox (portable, in a usb stick) 3.6 and it works.

The following link has the dlink´s firmwares related to resolution.


https://www.dropbox.com/sh/60ppjwvuhaz7fcu/AACJl1h-LpxmMpGLQw2AcV6oa?dl=0

Thanx!!!
syneox
DD-WRT Novice


Joined: 29 Dec 2014
Posts: 4

PostPosted: Mon Dec 29, 2014 14:46    Post subject: Reply with quote
phew...this was a pain to downgrade from 2.17! at the end it worked, thanks to people here!

I tried latest from dec/14 and while it flashed OK I was unable to display home page of router than I got back to official firmware I guess, v24-sp2 (03/25/13) std

Which firmware are you all on? Any recommendations?
challpagal
DD-WRT Novice


Joined: 28 Jan 2015
Posts: 1

PostPosted: Wed Jan 28, 2015 5:23    Post subject: Reply with quote
I getted some problems for leds, and dlink developered some new version, and my problem gets fixed.But when i tried now to flash dd-wrt says invalid image.After couple of time i found solution for other firmware.Read carefully.Response at your own risk. ??

_________________
GuL
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Ralink SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum