Problems with my WAP54G v3.1 MAC

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Hardware DIY / Hardware Mods
Author Message
dilan53
DD-WRT Novice


Joined: 09 Nov 2011
Posts: 4

PostPosted: Wed Nov 09, 2011 16:03    Post subject: Problems with my WAP54G v3.1 MAC Reply with quote
I have good huge problem, after making several ports to my WAP54G v3.1 from linksys to dd-wrt, I've noticed that I altered the original MAC mac computer placing the default DD-WRT, and attempting to make the change using the method:

nvram set et0macaddr = XX: XX: XX: XX: XX: XX
nvram set WAPver = 3
nvram commit



the router is blocked, do not access the web interface does not respond to ping.

I have already made ​​several reset using the technique of cutting the pin 16 and reinstalling the firmware using the tftp method, but does not complete the installation and is brick again.

please I need your help urgently, thanks
Sponsor
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Hardware DIY / Hardware Mods All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum