dilan53 DD-WRT Novice
Joined: 09 Nov 2011 Posts: 4
|
Posted: Wed Nov 09, 2011 20:13 Post subject: Problems with my WAP54G v3.1 MAC |
|
I have good huge problem, after making several ports to my WAP54G v3.1 from linksys to dd-wrt, I've noticed that I altered the original MAC mac computer placing the default DD-WRT, and attempting to make the change using the method:
nvram set et0macaddr = XX: XX: XX: XX: XX: XX
nvram set WAPver = 3
nvram commit
the router is blocked, do not access the web interface does not respond to ping.
I have already made several reset using the technique of cutting the pin 16 and reinstalling the firmware using the tftp method, but does not complete the installation and is brick again.
please I need your help urgently, thanks
please be happy |
|