dctv411
DD-WRT Novice
Joined: 19 Jul 2012
Posts: 2
|
 Posted: Mon Jul 30, 2012 20:50 Post subject: connectivity issues. |
 |
| Okay, so recently I had installed a DD-WRT firmware on two routers, one being the E3000, the other being the E4200, both linksys brand routers. Both times the installation went fine, neither were bricked, I had full access to settings and options, but yet I have had connectivity issues with both of them, and I don't know what to do. The signal with show up, I connect to it, but it says it has connectivity issues. Thank you for any responses. |
|
crashfly
DD-WRT Guru
Joined: 24 Feb 2009
Posts: 2026
Location: Sol System > Earth > USA > Arkansas
|
| Posted: Tue Jul 31, 2012 0:06 Post subject: |
|
Have you looked over the "Peacock" thread (see signature)? It should explain most of the questions you might have if you are having problems.
That being said, you have mentioned very little of your setup. Do you have cable/DSL? Have you reset your cable/DSL modem after trying to connect your router to it? Have you verified all cables are connected correctly (modem to WAN, etc)? I mean seriously, give us a little more to go on.
_________________
E3000 22200M KongVPN K26
WRT600n v1.1 refirb mega 18767 BS K24 NEWD2 [not used]
WRT54G v2 16214 BS K24 [access point]
Try Dropbox for syncing files - get 2.5gb online for free by signing up.
Read! Peacock thread
*PLEASE* upgrade PAST v24SP1 or no support. |
|
