tl-wr740n v4
I know it sounds unprofessional and stupid ( ) but flashing new builds (r29218_3.7.2016 and r29409_4.5.2016 particularly) reduced TX Power from 16 to 13
I have today's screenshot with previous fw (can't be 100% sure, it was either r18777 or r18740) and you can see in status 16dBm
Tried to setup same settings, or different ones - can't make it back to 16
Posted: Fri May 27, 2016 14:40 Post subject: Flaw in did wrt software
Hello, I have tp link tl wr740n v4 Installed dd art software. But sadly the wpa2 and aes not working. Pls fix it and update the software. Due to this I again went to stock s/w
Posted: Wed Jul 13, 2016 2:58 Post subject: wr740n v4
good day... I'm having problem with the wireless connection I can't connect my mobile device using the wpa2 personal with aes algorithm and also with the access restriction tab it seems that it can't block any websites that I want..
Hi. I'm new here and I need to know two basic (for most of you) things.
I have the WR740N v4.26 router with stock firmware (3.16.xxxx).
I know it will flash via web update etc. But I need to know which hard-reset method to use before and after the dd-wrt flash? 30 or 30/20/30 ?
Also which is the most stable dd-wrt build for it?
I'll use it only for wifi client (router) mode.
Do I only flash the factory-to-ddwrt.bin file or I have to flash the ..webflash.bin file in addition?
A user posted above that build 29409 from April is good to go with. The router-database suggests 21061..
Confused.
Joined: 04 Nov 2012 Posts: 525 Location: Acapulco, Mexico
Posted: Sun Aug 14, 2016 11:50 Post subject:
tedych wrote:
30 or 30/20/30 ?
Do I only flash the factory-to-ddwrt.bin file or I have to flash the ..webflash.bin file in addition?
A user posted above that build 29409 from April is good to go with. The router-database suggests 21061...
30
Only factory
If a user post, listen to user, the database is years out date it
Latest Bins are on the forum _________________ TP-Link: TL-WR741ND V4
TP-Link: TL-WR842ND V2
Ok, listening to the users, but the next post is about TX power problems with the same 29409 .
Maybe I will go with that, less TX power wouldn't be much of a problem to me I guess.
what do you think is the problem im using tplink wr740nv4 dd-wrt build 29739 as repeater it gives many rx error..my main router linksys e1200v2 with tomato installed.
Joined: 31 Aug 2010 Posts: 66 Location: Valparaiso, Chile
Posted: Sat Sep 03, 2016 18:02 Post subject:
Same encryption in link? same tx power? obstacles? interference?
Also check Ack timing to be 30% over actual distance.
Check all this and post results to help u. _________________ WIFITxRx NetWorks
DD-WRT user from 2009 to date
Routers:
tp-link 740n v1.x to v5.x (60+)
tp-link 741nd v1.x to v5.x (80+)
tp-link 841nd v7 (5)
tp-link 841nd v8 v9 (10+)
tp-link 941nd v3.6 (2)
ubnt bullet m2hp (1)
ubnt airgrid m2hp m5hp (4)
rb450g-rb2011-rbX86-rb433uah-rb912
And many more each month coming!
30 or 30/20/30 ?
Do I only flash the factory-to-ddwrt.bin file or I have to flash the ..webflash.bin file in addition?
A user posted above that build 29409 from April is good to go with. The router-database suggests 21061...
30
Only factory
If a user post, listen to user, the database is years out date it
Latest Bins are on the forum