When you say "reset", do you mean just press the reset button?
barryware wrote:
lyrebird wrote:
I have exact the same issue. Have a e1000 v1 version. Flashed to tomato, but found repeater bridge mode is important to my home network. Want to flash to dd-wrt. But tomato web gui reports "File contains an invalid header". Please help.
My current tomato version is Tomato USB 1.27. Thanks.
you need to flash back to stock firmware. Then install dd-wrt.
I put the modded stock linksys build back on my ftp site in the "new uploads" folder. Not really the right place but it is there for now.
as I explained in this thread, reset your router to defailts, then flash the modded stock build via the tomato upgrade gui.
Joined: 26 Jan 2008 Posts: 13049 Location: Behind The Reset Button
Posted: Wed Jan 11, 2012 21:59 Post subject:
DON'T DO IT!!!
The modded build on my ftp site is for a version 2.1.
follow the same instruction I gave in this thread. upload the stock linksys firmware for your router, and upload the tomato build you flashed. I will modify the stock build so you can flash it from the tomato gui.
DO NOT FLASH THE MODDED BUILD THAT IS ON THE SITE!
EDIT: I removed the build and hopefully you read this post and I removed it before you downloaded it.
upload the stock linksys build for your router and the tomato build you flashed. _________________ [Moderator Deleted]
The modded build on my ftp site is for a version 2.1.
follow the same instruction I gave in this thread. upload the stock linksys firmware for your router, and upload the tomato build you flashed. I will modify the stock build so you can flash it from the tomato gui.
DO NOT FLASH THE MODDED BUILD THAT IS ON THE SITE!
EDIT: I removed the build and hopefully you read this post and I removed it before you downloaded it.
upload the stock linksys build for your router and the tomato build you flashed.
I have exact the same issue. Have a e1000 v1 version. Flashed to tomato, but found repeater bridge mode is important to my home network. Want to flash to dd-wrt. But tomato web gui reports "File contains an invalid header". Please help.
My current tomato version is Tomato USB 1.27. Thanks.
you need to flash back to stock firmware. Then install dd-wrt.
I put the modded stock linksys build back on my ftp site in the "new uploads" folder. Not really the right place but it is there for now.
as I explained in this thread, reset your router to defailts, then flash the modded stock build via the tomato upgrade gui.
Hey Barryware,
My version-1 E1000 is stuck on tomato, and I need dd-wrt. I could really use this modded firmware (FW_E1000_2.1.02.005_US_MOD.bin), but I'm not finding it on your server.
Is there a way I could get a copy?
I got the same issue. I installed a Tomato FW into my Linksys E1000(V1) and now want to flash back to stock firmware. An error message that said "File contains an invalid header" when trying to load the stock FW. Can anyone help?
Joined: 26 Jan 2008 Posts: 13049 Location: Behind The Reset Button
Posted: Tue May 08, 2012 10:54 Post subject:
ep11365 wrote:
I got the same issue. I installed a Tomato FW into my Linksys E1000(V1) and now want to flash back to stock firmware. An error message that said "File contains an invalid header" when trying to load the stock FW. Can anyone help?
Thank you so much!
I put the file back up on my ftp server in the new uploads folder. _________________ [Moderator Deleted]