I flashed dd-wrt according to that thread, even sent a pm to the topic author (Delboy). No luck, he also doesn't have a clue about my adsl not working. Tried flashing 3 times dd-wrt and even openwrt. Got ADSL + wifi the first time and then it somehow stopped working. Now, ADSL works only with original fw (annex a) and my old saved config. So it's not the hardware (i'm writing this connected to the net via SX763), but some config. Somehow boardid got changed from sx763 to sx76x-danube and god only knows what other env variables. How can i reset the roter config under dd-wrt?
Afterwards if everything is working you shoud be able to install dd-wrt...
Same problem as with dd-wrt: no adsl.
The already mentioned tutorial from pcekspert forum requires running openwrt to be able to flash back to original fw.
root@OpenWrt:~# /etc/init.d/dsl_control status
Chipset: Ifx-Danube 1.3
Line State: DOWN [0x300: handshake]
Data Rate: 0 b/s / 0 b/s
Line Attenuation: 0.0dB / 0.0dB
Noise Margin: 0.0dB / 0.0dB
Line Uptime: down
Posted: Sun Apr 28, 2013 21:30 Post subject: Alcatel onetouch l100
Hi guys. I signed lte contract and got Alcatel onetouch l100. I am new to DD-WRT so i have question. Can my Alcatel onetouch l100 work on siemens sx763 with DD-WRT? Id it can i will install it immediately. Thank You in advance.
Alcatel OT L100V is supported in dd-wrt firmware,
if it will work or not in the SX763 is difficult to guess.
That router has a buggy USB controller which has caused problems with various 3G sticks in the past but kernel USB drivers for the controller has been bug fixed during the last half year so those problems may be gone now.