Posted: Sun Jan 08, 2012 16:46 Post subject: Super Channel
Hello
I have bullet m2hp on 15 dbi hyperlink, and i upgrade the orginal frimware to ddwrt and its now
DD-WRT v24-sp2 (12/20/11) std - build 18024
i buy full license for activation and super channel
and i activiate both of them..
The problem is that i couldnt see any new channel on the wirless chaneel and i dont know how to use it, i have put it as enable from advance option.. Is that it?
another question:
I couldnt log in to the bullet from the bed room, i have to go to the window and put my labtop there to connect, and my friend who lives next to me they were also unable to connect..but there is no problem with the strength of signel,
Do I have the vision on a straight line to bullet to connect to it?? because normal access like tblink, you can easily connect to it if you put it on the surface like bullet ?
and im sure that there is no problem in my configration
do i have to put for every one need to access my network an access point to connect to my bullet, meaning what is the best way that users can connect to my network easily.?
these options are disabled on superchannel because:
1. There is no need for a list of regular frequencies/channels
because thats what you want to bypass by using superchannel.
With superchannel you can choose every frequency/channel that
is supported by our wireless hardware.
2. The antenna gain setting ensures that the sum (tx + antenna) is regulated to not exceed the max of the specified regulatory domain.
There is no need for this, because by using superchannel you dont want to be in a regulatory domain.
SuperChannel allows you to use special frequencies from 2192 Mhz - 2732 Mhz (802.11g capable devices only) and 4915 Mhz - 6100 Mhz (802.11a capable devices only).
the point is these channels do not become available after activation, only the standard ones,
Posted: Thu Nov 20, 2014 9:55 Post subject: how to properly activate super channel
to achieve the Super Channel functionallity you need to proceed as
following:
Activate your SuperChannel licence at Wireless>SuperChannel
enable SuperChannel at Advanced Wireless Settings
Then under wireless basic settings click advanced you are looking for setting hidden somewhere that says scan-list
specify a frequency range in Ghz at the Scan-List in Advanced Wireless
Settings
like "2412-2418" (without quotes)
you can also add multiple ranges by seperating them with spaces
reboot the device
Now you will see the enabled Channels in Wireless>Basic
Settings>Wireless Channel
For legal reasons, we need you to set the frequency yourself.
As some frequencies may be illegal in your country,
we suggest checking which frequencies you're allowed to use before start
using Superchannel.
consider that superchannel is used for connecting devices,
which are able to use the frequency you set.
You cannot connect standard device to it, if its on a channel, which is
not a standard Channel.
I have done this on my own wireless router so I know for a fact it defiantly works when done correctly you can basically specify any frequency you like providing you have a device that can connect to that frequency...